FAQ
FAQAbout Products
- FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-Q Series
FAQ
Keyword Search
FAQ within [ MELSEC-Q Series ]
-
Remedy for the division-related operation error
The operation error occurs when the divisor is 0.Create a program in which a comparison operation instruction or another method executes a division instructi... More Details >>
- No:22691
- Release Date:2018/09/03 17:29
-
Accessing file registers from the built-in Ethernet port QCPU using A-compatible 1E frames
The QnUDE(H)CPU modules with serial numbers with upper 5 digits of "14112" or later indicate compatibility with the function. The accessible device range is ... More Details >>
- No:22645
- Release Date:2018/09/03 17:29
-
Battery life in the universal model QCPU
It depends on the model of the CPU module, the amount of battery consumption, and the power-on time ratio. Example) For Q06UDHCPU with power-on time ratio... More Details >>
- No:22633
- Release Date:2018/09/03 17:29
- Update:2018/09/21 11:28
-
Difference between Q24DHCCPU-V and Q12DCCPU-V
Hardware specifications are different. For hardware specifications, refer to the following manuals. - MELSEC-Q C Controller Module User's Manual - C Contro... More Details >>
- No:22629
- Release Date:2018/09/03 17:29
- Update:2018/09/21 10:41
-
The following Diatrend cable can be used.- DQ-U2 More Details >>
- No:22623
- Release Date:2018/09/03 17:29
-
USB cable type for CPU modules
It is type B. More Details >>
- No:22622
- Release Date:2018/09/03 17:29
-
Settings of the built-in Ethernet port of the universal model QCPU
Make settings of the built-in Ethernet port in the [Built-in Ethernet Port Setting] tab of the PLC parameter in GX Works2 or GX Developer. More Details >>
- No:22618
- Release Date:2018/09/03 17:29
- Update:2018/09/21 10:06
-
GX Works2's compatibility with Monitor (write mode)
From version 1.62Q, GX Works2 supports Monitor (write mode). Pressing Shift+F4 allows an online change. More Details >>
- No:22612
- Release Date:2018/09/03 17:29
- Update:2018/09/20 18:18
-
Setting of Q series registers whose data is held when a power failure occurs
Assign data registers (D) to Latch (1) or Latch (2) in the "Device Setting" window ([PLC Parameter] -> "Device Setting" window) to hold the data when a po... More Details >>
- No:22601
- Release Date:2018/09/03 17:29
-
GX Works2's compatibility with the A series modules
GX Developer is automatically launched when A series is selected as a new project in GX Works2.For the A series modules, use GX Developer. More Details >>
- No:22594
- Release Date:2018/09/03 17:29
131-140 of Total 213