The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U

The analog input type (temperature/voltage/current) and offset/gain can be set for each channel.

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurato

When a coil of the high-speed counter or an interrupt pointer is programmed, the programmable controller system adjusts

"E" represents AC power supply and "D" represents DC power supply. The alphabets following "E" and "D" represent output

To check the version of the MELSEC-F series, connect GX Works2 (personal computer) or HPP to a programmable controller,

For your safety, programmable controllers must be grounded. Incomplete common grounding within the control panel or com

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

One FX3U-16CCL-M can be connected to the FX3U series.

No, they cannot be connected. Connect the units having the same power supply type.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

131-140 of Total 198

prev 14 / 20page next

Differences in the specifications between the programmable controllers used in Japan and overseas.

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U series are the sink input. The progra... More Details >>
- No：24913
- Release Date：2019/04/17 11:39
- Category： MELSEC-F Series , Main Unit
Selection of analog inputs

The analog input type (temperature/voltage/current) and offset/gain can be set for each channel. More Details >>
- No：24902
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Analog Control
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-L (for Ethernet communications)

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurator-EN-L can be downloaded from Mitsubi... More Details >>
- No：24869
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series
Input filter adjustment when a high-speed counter or the interrupt function is used

When a coil of the high-speed counter or an interrupt pointer is programmed, the programmable controller system adjusts the filter constant of the correspond... More Details >>
- No：24867
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , High-Speed Counter
Models of the MELSEC-F series main units

"E" represents AC power supply and "D" represents DC power supply. The alphabets following "E" and "D" represent output types. "S" represents replay output... More Details >>
- No：24776
- Release Date：2019/02/27 15:35
- Category： MELSEC-F Series , Main Unit
How to check the version of the MELSEC-F series

To check the version of the MELSEC-F series, connect GX Works2 (personal computer) or HPP to a programmable controller, and monitor the data in D8001. The l... More Details >>
- No：24772
- Release Date：2019/02/27 15:22
- Category： MELSEC-F Series , Engineering Software , Main Unit
How to ground programmable controllers

For your safety, programmable controllers must be grounded. Incomplete common grounding within the control panel or common grounding with heavy electrical s... More Details >>
- No：22276
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Number of FX3U-16CCL-M CC-Link master blocks that can be connected to the FX3U series

One FX3U-16CCL-M can be connected to the FX3U series. More Details >>
- No：25009
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Network/Communication
Connecting a DC power supply type extension unit to an AC power supply type main unit

No, they cannot be connected. Connect the units having the same power supply type. More Details >>
- No：25008
- Release Date：2019/04/23 11:12
- Category： MELSEC-F Series , Main Unit

131-140 of Total 198

Inquiries

page top