FAQ
FAQAbout Products
- FAQ > Drive Products > Inverters-FREQROL
FAQ
Keyword Search
Inverters-FREQROL
FAQ within [ Inverters-FREQROL ]
-
Yes, it is. However, it is not suitable for the low speed regenerative side. It is also recommended to use a dedicated control for winding/unwinding applicat... More Details >>
- No:20928
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
The tension controller is suitable for the equipment with low speed and small capacity. The tension controller is suitable for the equipment with low speed a... More Details >>
- No:20929
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
The anti-sway control can be performed with the inverter alone. More Details >>
- No:20930
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
Inverters with the components fixed on the circuit board with an adhesive, an countermeasure against the connector failing, or the cables tied (fixed) togeth... More Details >>
- No:20931
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
Yes, it is preferred. The accuracy becomes worse when the gap between the setting value and actual value increases. More Details >>
- No:20932
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
Yes, it is included. More Details >>
- No:20933
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
It is the length from the support of the rope to the center of gravity of the swinging. More Details >>
- No:20934
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
By inputting the rope length, the speed command is sent to suppress a swinging. More Details >>
- No:20935
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
Waiting time at the instantaneous power failure
The count is started from the power failure. The count is started after the power restoration or reset release when the power failure period is too long, or ... More Details >>
- No:20939
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL
-
The internal transistor of the HC2 stops by turning on the SOF signal and stopping the converter. As a result, regenerative driving is not performed. However... More Details >>
- No:20941
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL , Options
51-60 of Total 1306