Inrush current does not flow since the full voltage directly applys theelectromagnet of SD-Q* and only resistance compon

For US-N/K/H type, since current is opened/closed by semiconductorelement, there is no lifetime related to operating cyc

These two different colors of the knob identify 2-element type and 3-element type of a thermal load relay. Gray: TH-* (H

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor b

For our reduced-voltage starter, when the starting time is over 15 sec,you need to review the selection of MCS and the w

It means the rated operating voltage (nominal voltage) range andfrequency (when AC operation) of a control coil.

It is possible to apply if the rated operating current value of a magneticcontator is more than the total rated current

It is a general starting method that applies full voltage to a motor in orderto start and stop. It is also called Full v

It is a value of voltage which determines the application related to closingcapacity, breaking capacity, opening/closing

SSR stands for "Solid State Relay" and "SSC" stands for "Solid StateContactor". Basically, SSR means the semiconductor r

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Contactors and Motor Starters > Motor Starters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Motor Starters ]

91-100 of Total 142

prev 10 / 15page next

About Low-voltage Power Distribution Products

Inrush current does not flow since the full voltage directly applys theelectromagnet of SD-Q* and only resistance component of theelectromagnet limits the cu... More Details >>
- No：23277
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

For US-N/K/H type, since current is opened/closed by semiconductorelement, there is no lifetime related to operating cycles, but werecommend to replace in 10... More Details >>
- No：23274
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

These two different colors of the knob identify 2-element type and 3-element type of a thermal load relay. Gray: TH-* (Heater 2-element type)Orange: TH-*KP t... More Details >>
- No：23273
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor burnout by heatingand bending a built-... More Details >>
- No：23269
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

For our reduced-voltage starter, when the starting time is over 15 sec,you need to review the selection of MCS and the wiring between MCD-MCS, and check whet... More Details >>
- No：23267
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It means the rated operating voltage (nominal voltage) range andfrequency (when AC operation) of a control coil. More Details >>
- No：23266
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It is possible to apply if the rated operating current value of a magneticcontator is more than the total rated current of motors. However, athermal load rel... More Details >>
- No：23263
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It is a general starting method that applies full voltage to a motor in orderto start and stop. It is also called Full voltage starting. More Details >>
- No：23256
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It is a value of voltage which determines the application related to closingcapacity, breaking capacity, opening/closing frequency andopening/closing durabil... More Details >>
- No：23247
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

SSR stands for "Solid State Relay" and "SSC" stands for "Solid StateContactor". Basically, SSR means the semiconductor relay of smallcapacity 1-pole configur... More Details >>
- No：23246
- Release Date：2018/09/12 15:11

91-100 of Total 142

Inquiries

page top