Start main contents

Factory Automation

FAQ

Factory Automation

FAQAbout Products

  • Font Size
  • S
  • M
  • L

FAQ within [ FREQROL-A800 ]

21-30 of Total 144

prev 3 / 15page next
  • FR-A800

    No. Check the parameter setting of the A700, and then adjust the parameter setting of the A800 to those of the A700. For the details, refer to the replacemen... More Details >>

    • No:21107
    • Release Date:2018/08/22 16:25
  • FR-A800

    - The installation size is compatible for the following capacities. Compatible: 200 V class 90K or lower, 400 V class 7.5K or lower and 18.5K to 280K- The in... More Details >>

    • No:21110
    • Release Date:2018/08/22 16:25
  • STOP function of the FR-A800

    No, it is not. It is released by the inverter reset that releases E.OHT. More Details >>

    • No:20843
    • Release Date:2018/08/22 16:24
  • FR-A800-R2R

    They cannot be set with the frequency. Because the command is input at the line speed, consider the line speed of the initial winding diameter at 20 Hz. The ... More Details >>

    • No:20888
    • Release Date:2018/08/22 16:24
  • FR-A800-R2R

    It is possible when the dancer control and tension sensor feedback speed control is used and the PID calculation is turned OFF. Because the PID compensation ... More Details >>

    • No:20889
    • Release Date:2018/08/22 16:24
  • FR-A800-R2R

    If Pr.361 = 0, the second terminal can be used as the line speed command when X114 is ON, and as the frequency setting value when X114 is OFF. If Pr.361 = 3,... More Details >>

    • No:20891
    • Release Date:2018/08/22 16:24
  • FR-A800-E

    It is available if the CC-Link option of the FR-A8NC is installed. More Details >>

    • No:20894
    • Release Date:2018/08/22 16:24
  • FR-A800-2

    The output turns OFF (0 mA) during the inverter reset. More Details >>

    • No:20921
    • Release Date:2018/08/22 16:25
  • FR-A800-R2R

    The gain of the tension PI gain automatic tuning is the one of the dancer feedback speed control. The gain adjusted by speed control P gain compensation is t... More Details >>

    • No:20925
    • Release Date:2018/08/22 16:25
  • Anti-sway control

    Set 3 kg (intermediate value) for the load weight 1 to 5 kg. More Details >>

    • No:20953
    • Release Date:2018/08/22 16:25

21-30 of Total 144

Inquiries