No, they are not connected inside the inverter.

Other than "0" can be input. The inverter is reset by writing any numerical value.

They are not received during the operation. They are also not received if the command authority does not exist in the co

It decelerates and stops. The operation is the same as the one when the Bit of forward rotation command and reverse rota

When the second torque limit is used, the settings of Pr.816 and 817 are valid.

There is no setting to disable it, but setting a high torque limit level such as 400 % can disable the limit.

Overshooting of the speed due to the acceleration/deceleration may be the cause. Overshooting is more likely to occur wh

Check the setting value of Pr.37 (Speed display). When the machine speed is set, Pr.811 is disabled. Change the setting

They are not output while the motor is coasting even under Vector control.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

1331-1340 of Total 1368

prev 134 / 137page next

FR-A7NCE connector

No, they are not connected inside the inverter. More Details >>
- No：21225
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
System environment variable of the Modbus-RTU communication

Other than "0" can be input. The inverter is reset by writing any numerical value. More Details >>
- No：21224
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
System environment variable of the Modbus-RTU communication

They are not received during the operation. They are also not received if the command authority does not exist in the communication. When they are executed i... More Details >>
- No：21223
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
System environment variable of the Modbus-RTU communication

It decelerates and stops. The operation is the same as the one when the Bit of forward rotation command and reverse rotation command are turned OFF. More Details >>
- No：21222
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
Torque limit

When the second torque limit is used, the settings of Pr.816 and 817 are valid. More Details >>
- No：21218
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
Torque limit

There is no setting to disable it, but setting a high torque limit level such as 400 % can disable the limit. More Details >>
- No：21217
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
IPM motor drive

Overshooting of the speed due to the acceleration/deceleration may be the cause. Overshooting is more likely to occur when the load inertia is too high. As a... More Details >>
- No：21216
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
Slip compensation

Yes, it is. More Details >>
- No：21213
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
Setting resolution switching

Check the setting value of Pr.37 (Speed display). When the machine speed is set, Pr.811 is disabled. Change the setting to the rotation speed. More Details >>
- No：21161
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-A700
Vector control

They are not output while the motor is coasting even under Vector control. More Details >>
- No：21158
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-A700

1331-1340 of Total 1368

Inquiries

page top