Connection of FX-20P and FX3U series

Whenan entry code (2nd entry code) registration is set in the FX3U series, sucherror canoccur. More Details >>

Difference in specifications between CC-Link versions

Ver.1.10 is a standard where CC-Link station-to-station cable length restriction in Ver. 1.00 has been removed, and the length of all station-to-station cabl... More Details >>

Access to a GOT

It is impossible to access the GOT via a universal model QCPU module. More Details >>

Creating function blocks

The number of FB definitions created in a project has no limitation. More Details >>

How to specify intelligent function module devices

For "U**", set the first two digits of the start I/O number of an intelligent function module in three-digit representation.Example) For X/Y1F0, set "U1F". More Details >>

Ladder programs for GX Configurator-FL

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed. More Details >>

FL-net setting of GX Works2

You can set the parameters of the FL-net interface module with the data operation of the intelligent function module. For details and operation procedure of... More Details >>

Setting a high-speed timer and a low-speed timer

In the PLC parameter setting of GX Developer, delete the start "200" of the default high-speed timer and input "0". The message indicating that "There is a d... More Details >>

Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-L (for Ethernet communications)

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurator-EN-L can be downloaded from Mitsubi... More Details >>

MX Component Version 4's compatibility with Visual Studio 2005

Yes. More Details >>