The following points are different for the iQ-F series. ・All output disabled flag (SM8034) When SM8034 is ON, the all ou

There is no difference in functionality, only in the number of connections.

LD instruction: 0.35 μs, MOV instruction: 0.779 μs. For other instructions, see the manual below. MELSEC iQ-F FX5 Progr

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU modul

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When conn

There are three QoS levels and FX5-ENET is also supported. ・QoS0 - The message is sent only once from the source clien

Ladder program, ST program ・It is supported from the first product. SFC program The following version supports Online pr

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, wr

N:N Network, Parallel Link, MC protocol, Non-protocol communication, MELSOFT connection, MODBUS RTU, and Predefined prot

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

81-90 of Total 266

prev 9 / 27page next

Regarding specifications of the forced ON/OFF function for external input/output

The following points are different for the iQ-F series. ・All output disabled flag (SM8034) When SM8034 is ON, the all output disabled flag is given priorit... More Details >>
- No：44331
- Release Date：2024/03/20 12:54
- Category： MELSEC iQ-F Series , CPU Module
Regarding differences in simple CPU communication functions

There is no difference in functionality, only in the number of connections. More Details >>
- No：40039
- Release Date：2023/08/24 15:44
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding Instruction processing time when the program capacity: 128 K steps are set

LD instruction: 0.35 μs, MOV instruction: 0.779 μs. For other instructions, see the manual below. MELSEC iQ-F FX5 Programming Manual (Instructions, Standa... More Details >>
- No：39362
- Release Date：2023/01/12 17:12
- Category： MELSEC iQ-F Series , CPU Module
Regarding error 2440H on CPU module when using FX5-CCLGN-MS

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU module is also notified of the error. Ther... More Details >>
- No：39282
- Release Date：2023/01/12 16:49
- Category： MELSEC iQ-F Series , Network/Communication
Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding the type of Ethernet connection cable

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When connecting directly to the computer, cr... More Details >>
- No：22295
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:23
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the QoS function of the MQTT Communication function

There are three QoS levels and FX5-ENET is also supported. ・QoS0 - The message is sent only once from the source client. 　　　　　　Messages are not guarant... More Details >>
- No：40056
- Release Date：2023/08/25 09:04
- Category： MELSEC iQ-F Series , Network/Communication
Regarding Online program Change for FX5 CPU module

Ladder program, ST program ・It is supported from the first product. SFC program The following version supports Online program Change. ・FX5U/FX5UC module ... More Details >>
- No：40018
- Release Date：2023/08/24 14:30
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding changing the current address (user unit, pulse unit)

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, writing is disabled during positioning... More Details >>
- No：39356
- Release Date：2023/02/15 13:03
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding communication supported by built-in RS-485 port

N:N Network, Parallel Link, MC protocol, Non-protocol communication, MELSOFT connection, MODBUS RTU, and Predefined protocol support are available. More Details >>
- No：22322
- Release Date：2018/08/30 13:55
- Update：2022/12/22 10:16
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

81-90 of Total 266

Inquiries

page top