Class1 communication sends and receives data at regular intervals. It is mainly used for I/O communication and motion co

In the case of positioning control and OPR control, there are three ways to start positioning: (1)[cd. 184] Turn on the

The FX5-2HC/ES must be connected to the eighth module from the power supply module (CPU Module, expansion power supply m

Yes, as long as the capacity is expandable to the file register (R), it can be transmitted by using the file operation i

Since the COM terminals is connected internally, there is no problem to use either one of them.

The FX5-CCLGN-MS firmware version 1.010 or later supports a communication speed setting of 100 Mbps.

The CC-Link IE TSN has a CC-Link IE TSN Class B/A, and the available switching HUBs are also specified by supported stan

The connector's terminal arrangement is the smaller number on the left and larger number on the right.

The FX5-ENET module parameter of GX Works3 can send up to 10 messages and the module FB can send up to 256 characters at

The EtherNet/IP settings of the FX5-EIP can be set in GX Works3. No additional tools are required.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

1-10 of Total 266

prev 1 / 27page next

Regarding features of EtherNet/IP Communication

Class1 communication sends and receives data at regular intervals. It is mainly used for I/O communication and motion control between PLC and sensor. Class... More Details >>
- No：45485
- Release Date：2025/11/12 13:55
- Category： MELSEC iQ-F Series , Network/Communication
Regarding how to start positioning

In the case of positioning control and OPR control, there are three ways to start positioning: (1)[cd. 184] Turn on the positioning start signal. (2)Exec... More Details >>
- No：39360
- Release Date：2023/01/12 17:19
- Category： MELSEC iQ-F Series , Motion/Positioning
Regarding FX5-2HC/ES restrictions

The FX5-2HC/ES must be connected to the eighth module from the power supply module (CPU Module, expansion power supply module, built-in power supply I/O Modu... More Details >>
- No：44339
- Release Date：2024/03/20 13:25
- Category： MELSEC iQ-F Series , High-Speed Counter
Regarding sending files in an SD Memory Card by Mail

Yes, as long as the capacity is expandable to the file register (R), it can be transmitted by using the file operation instruction. When sending, please set... More Details >>
- No：44369
- Release Date：2024/03/27 16:41
- Category： MELSEC iQ-F Series , Network/Communication
Regarding COM terminals of FX5-2HC/ES

Since the COM terminals is connected internally, there is no problem to use either one of them. More Details >>
- No：44874
- Release Date：2025/03/18 10:25
- Category： MELSEC iQ-F Series , High-Speed Counter
Regarding the communication speed of FX5-CCLGN-MS

The FX5-CCLGN-MS firmware version 1.010 or later supports a communication speed setting of 100 Mbps. More Details >>
- No：39358
- Release Date：2023/01/12 17:09
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the switching Hubs that can be used for CC-Link IE TSN

The CC-Link IE TSN has a CC-Link IE TSN Class B/A, and the available switching HUBs are also specified by supported standards, synchronization accuracy, etc.... More Details >>
- No：39284
- Release Date：2023/01/12 16:50
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the terminal arrangement of I/O module (extension connector type)

The connector's terminal arrangement is the smaller number on the left and larger number on the right. More Details >>
- No：39329
- Release Date：2023/01/12 16:57
- Category： MELSEC iQ-F Series , I/O Module
Regarding the Number of Sending Addresses for Email function

The FX5-ENET module parameter of GX Works3 can send up to 10 messages and the module FB can send up to 256 characters at a time. By entering multiple email ... More Details >>
- No：40052
- Release Date：2023/08/25 10:23
- Category： MELSEC iQ-F Series , Network/Communication
Regarding understanding EtherNet/IP Settings for FX5-EIP

The EtherNet/IP settings of the FX5-EIP can be set in GX Works3. No additional tools are required. More Details >>
- No：45487
- Release Date：2025/11/12 13:56
- Category： MELSEC iQ-F Series , Network/Communication

1-10 of Total 266

Inquiries

page top