The bit 10 of the special register SD1288 provides the connection status to a hub. When the bit 10 of SD1288 is ON, a hu

It is not possible to specify index modification to cross over the boundary between the internal user device (D) and the

- Ambient temperature: 25+/-5 degrees Celsius Full scale x (+/-0.3%) - Ambient temperature: 0 to 55 degrees Celsius Full

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destina

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the b

The data logging file transfer function allows for transfer of the logging data to an upper server regularly. It is tran

At least one L series CPU is necessary when using the simple PLC communication function.

X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (B

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash R

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it usi

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

41-50 of Total 105

prev 5 / 11page next

Connection status detection between a hub and the built-in Ethernet port of LCPU

The bit 10 of the special register SD1288 provides the connection status to a hub. When the bit 10 of SD1288 is ON, a hub is connected. More Details >>
- No：22759
- Release Date：2018/09/03 17:30
Index modification when using extended data register in LCPU

It is not possible to specify index modification to cross over the boundary between the internal user device (D) and the extended data register (D). Change t... More Details >>
- No：22822
- Release Date：2018/09/03 17:30
L60TCRT4(BW) accuracy

- Ambient temperature: 25+/-5degrees Celsius Full scalex (+/-0.3%) - Ambient temperature: 0 to 55degrees Celsius Full scalex (+/-0.7%) More Details >>
- No：22823
- Release Date：2018/09/03 17:30
- Update：2018/09/27 11:35
Simultaneous broadcast transmission setting for built-in Ethernet port LCPU

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destination Port Number: Other than FFFFh (S... More Details >>
- No：22785
- Release Date：2018/09/03 17:30
How to use L series extension modules

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the branch module and the extension module... More Details >>
- No：22738
- Release Date：2018/09/03 17:29
FTP transfer

The data logging file transfer function allows for transfer of the logging data to an upper server regularly. It is transferred when data logging is switched... More Details >>
- No：22741
- Release Date：2018/09/03 17:29
Configuration of simple PLC communication function using LCPU

At least one L series CPU is necessary when using the simple PLC communication function. More Details >>
- No：22747
- Release Date：2018/09/03 17:29
Number of points used for I/O assignment of LCPU built-in I/O function

X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (Built-In I/O Function)". More Details >>
- No：22762
- Release Date：2018/09/03 17:30
Remedy to an error message when performing online change in LCPU

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash ROM). Therefore, additional online cha... More Details >>
- No：22763
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:50
Precautions for use of SD memory card

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it using the CPU module. More Details >>
- No：22779
- Release Date：2018/09/03 17:30

41-50 of Total 105

Inquiries

page top