You can select from the output power (in 0.01 kW units) and cumulative energy (in 1 kWh/0.01 kWh units).

You can use it with the 700 series inverters. Note that the installation method of the card differs for the FR-E700 seri

Yes. The FR-A7NC E kit contains a dedicated front cover since its size changes by the installed board.You can additional

Check if the CC-Link wires are short-circuited and/or station numbers are duplicated.

You can select deceleration stop by setting Pr.502 (Stop mode selection at communication error). (Select from coasting t

For the inverter, the option card FR-A7NC is necessary.

Yes.You can issue operation (forward/reverse), frequency setting, parameter read/write, and operation monitor commands.

If you are using CC-Link just to monitor the inverter and using the analog signal and multi-speed setting to set the fre

You can start/stop operation, set the frequency, read/write parameters, and monitor the inverter via CC-Link communicati

Set Pr.340 (Communication startup mode selection) to other than "0".Also, set Pr.79 (Operation mode) to "0", "2", or "6"

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-F700P

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-F700P ]

51-60 of Total 295

prev 6 / 30page next

CC-Link

You can select from the output power (in 0.01 kW units) and cumulative energy (in 1 kWh/0.01 kWh units). More Details >>
- No：21885
- Release Date：2018/08/22 16:29
CC-Link

You can use it with the 700 series inverters. Note that the installation method of the card differs for the FR-E700 series and FR-A700/F700 series.If you hav... More Details >>
- No：21887
- Release Date：2018/08/22 16:29
CC-Link

Yes. The FR-A7NC E kit contains a dedicated front cover since its size changes by the installed board.You can additionally purchase the FR-A7NC E kit cover o... More Details >>
- No：21889
- Release Date：2018/08/22 16:29
CC-Link

Check if the CC-Link wires are short-circuited and/or station numbers are duplicated.　　 More Details >>
- No：21891
- Release Date：2018/08/22 16:29
CC-Link

You can select deceleration stop by setting Pr.502 (Stop mode selection at communication error). (Select from coasting to stop, deceleration to stop, and con... More Details >>
- No：21892
- Release Date：2018/08/22 16:29
CC-Link

For the inverter, the option card FR-A7NC is necessary.　　 More Details >>
- No：21897
- Release Date：2018/08/22 16:29
CC-Link

Yes.You can issue operation (forward/reverse), frequency setting, parameter read/write, and operation monitor commands. More Details >>
- No：21899
- Release Date：2018/08/22 16:29
CC-Link

If you are using CC-Link just to monitor the inverter and using the analog signal and multi-speed setting to set the frequency, you need to input them extern... More Details >>
- No：21900
- Release Date：2018/08/22 16:29
CC-Link

You can start/stop operation, set the frequency, read/write parameters, and monitor the inverter via CC-Link communication. More Details >>
- No：21901
- Release Date：2018/08/22 16:29
CC-Link

Set Pr.340 (Communication startup mode selection) to other than "0".Also, set Pr.79 (Operation mode) to "0", "2", or "6".Powering the inverter on automatical... More Details >>
- No：21903
- Release Date：2018/08/22 16:30

51-60 of Total 295

Inquiries

page top