Cause: AC line inside the controller may have detected the abnormalities. Measures: Check that the primary s

Cause:Program error (arithmetic processing, etc.). Teaching operation error. Peripheral equipment is offset. There is a

Cause:A servo OFF signal(SRVOFF)is being input from an external source. The operating right is not given.(IOENA paramete

Cause: A stop signal(STOP/STOP2/SKIP) is being input from an external source. The operating right is not given.(IOEN

Cause:Unusual noises can be caused by friction between movable parts, deformed parts, foreign matters getting inside, an

Cause:[Occurs only when operating manually]•T/B operation error.•The enabling device input is open.[Occurs when operatin

Cause:[Occurs only when operating manually]•T/B operation error.[Occurs when operating manually and automatically]•Fault

Cause:Deterioration in the reducer oil seal. Too much grease was applied. A grease other than the specified grease was a

Cause:A noise is made as the internally mounted fan and its casing resonate. A noise is made by the fan catching interna

Cause:The fuse (4A fuse) installed at the bottom of the 24 V power supply circuit in the controller may have blown out.F

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Robots

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Robots

Industrial/Collaborative Robots-MELFA(54)

Vertical type robot(18)
Horizontal type robot(18)
Ceiling mounted, holizontal type robot(18)
Collaborative Robots

FAQ within [ Robots ]

1-10 of Total 18

prev 1 / 2page next

The operation panel does not light up. Although the T/B has got the electricity, the operation of T/B cannot be done.

Cause: AC line inside the controller may have detected the abnormalities. Measures: Check that the primary side’s power supply voltage is being su... More Details >>
- No：23182
- Release Date：2018/09/07 16:09
- Update：2018/10/03 14:52
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
The position becomes offset.

Cause:Program error (arithmetic processing, etc.). Teaching operation error. Peripheral equipment is offset. There is a setting error in the origin position ... More Details >>
- No：23172
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
The servo-on cannot be performed.

Cause:A servo OFF signal(SRVOFF)is being input from an external source. The operating right is not given.(IOENA parameters settings/exclusive input and outpu... More Details >>
- No：23170
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
In automatic drive mode, the system does not start up or the robot stops during automatic drive.

Cause: A stop signal(STOP/STOP2/SKIP) is being input from an external source. The operating right is not given.(IOENA parameters settings/exclusive input... More Details >>
- No：23171
- Release Date：2018/09/07 16:09
- Update：2018/10/03 14:48
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
An unusual noise can be heard (from the robot arm).

Cause:Unusual noises can be caused by friction between movable parts, deformed parts, foreign matters getting inside, and defects in belt tension.An unusual ... More Details >>
- No：23167
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
Brake is not working properly.

Cause:[Occurs only when operating manually]•T/B operation error.•The enabling device input is open.[Occurs when operating manually and automatically]•Faulty ... More Details >>
- No：23183
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
Brake is not working properly.

Cause:[Occurs only when operating manually]•T/B operation error.[Occurs when operating manually and automatically]•Faulty connection of the cables that run b... More Details >>
- No：23178
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
Oil is leaking.

Cause:Deterioration in the reducer oil seal. Too much grease was applied. A grease other than the specified grease was applied. Excess grease left on the uni... More Details >>
- No：23174
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
An unusual noise can be heard (from RC).

Cause:A noise is made as the internally mounted fan and its casing resonate. A noise is made by the fan catching internal wiring.Measures:Check the state of ... More Details >>
- No：23168
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
The T/B does not display anything.

Cause:The fuse (4A fuse) installed at the bottom of the 24 V power supply circuit in the controller may have blown out.For the fuse blowout, the emergency st... More Details >>
- No：23184
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot

1-10 of Total 18

Inquiries

page top