It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breake

It is not possible to combine them at the same time. You need to choose one of them.

Almost ELCBs can be connected n reverse. Check the item column of specification table "reverse connection (below 230 V A

MCB can be used at 85% or less relative humidity and no condensation.

It is a circuit breaker which has higher instantaneous tripping current value in order to prevent unwanted tripping by m

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.)

It is an instantaneous tripping circuit breaker which does not have overcurrent tripping characteristic for standard cir

Set the handle holder to the right side of the drawout frame with the included screw and nut, and store the drawout hand

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1

If switching of neutral pole is not needed, it is possible to use 3-pole MCCB for 3-phase 4- wire circuit. Generally, it

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

91-100 of Total 123

prev 10 / 13page next

Inverse time delay operating characteristic

It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breakers, protection characteristic meeting... More Details >>
- No：22387
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
ACB　combination Ground fault protection and earth leakage protection

It is not possible to combine them at the same time. You need to choose one of them. More Details >>
- No：22419
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
ELCB reverse connection

Almost ELCBs can be connected n reverse. Check the item column of specification table "reverse connection (below 230 V AC)" in the catalog. If it says "Possi... More Details >>
- No：22434
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
MCB relative humidity

MCB can be used at 85% or less relative humidity and no condensation. More Details >>
- No：24822
- Release Date：2019/04/09 15:11
- Category： Miniature Circuit Breakers
High inst MCCB for transformer primary side

It is a circuit breaker which has higher instantaneous tripping current value in order to prevent unwanted tripping by magnetizing inrush current of a transf... More Details >>
- No：22358
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Use in Particular Applications
Use in 40℃～60℃

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.) In the case that the ambient temperat... More Details >>
- No：22370
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
MCCB Inst only

It is an instantaneous tripping circuit breaker which does not have overcurrent tripping characteristic for standard circuit breaker and only protects agains... More Details >>
- No：22383
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Use in Particular Applications
ACB How to store drawout handle

Set the handle holder to the right side of the drawout frame with the included screw and nut, and store the drawout handle. However, the circuit breaker with... More Details >>
- No：22437
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
IEC60947-2 standard

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1000V AC or less, or DC 1500V DC or le... More Details >>
- No：22361
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
MCCB 3P4W 3P use

If switching of neutral pole is not needed, it is possible to use 3-pole MCCB for 3-phase 4- wire circuit. Generally, it is recommended to use 4-pole circuit... More Details >>
- No：22385
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers

91-100 of Total 123

Inquiries

page top