Flatness of mounting plane: 1 mm or less. In addition, it is necessary to consider the horizontality of the panel.

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage prot

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified.

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with

It is the Earth Leakage Circuit Breaker with rated residual operating current of higher than 30mA but not exceeding 1000

It is voltage which ensures withstand voltage and it is used as basis to determine insulation distance.

For Fixed type, the depth from the circuit breaker mounting surface to the panel board front is fixed. Adjustable-type i

The test position is a position where a main circuit is in the "disconnected" state and only control circuit is in the "

It is possible to attach closely if there is no problem about the insulation distance between live parts such as a termi

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

101-110 of Total 123

prev 11 / 13page next

Horizontal allowable distance when installing ACB

Flatness of mounting plane: 1 mm or less.In addition, it is necessary to consider the horizontality of the panel. More Details >>
- No：37698
- Release Date：2020/01/17 17:32
- Category： Air Circuit Breakers
4-pole type in 100VAC or 110VAC

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage protection does not operate. More Details >>
- No：24820
- Release Date：2019/04/09 15:10
- Category： Earth Leakage Circuit Breakers
Default setting of electronic breakers

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified. However, only the pre-alarm is set to... More Details >>
- No：22438
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Storage temperature range of MCCBs and ELCBs

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing even in a short time. More Details >>
- No：22426
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Micro-load AL and AX switch

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with the standards (CE marking product an... More Details >>
- No：22413
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
ELCB medium-sensitivity

It is the Earth Leakage Circuit Breaker with rated residual operating current of higher than 30mA but not exceeding 1000mA. We provide the products of "100, ... More Details >>
- No：22395
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Rated insulation voltage

It is voltage which ensures withstand voltage and it is used as basis to determine insulation distance. More Details >>
- No：22362
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Fixed-type and Adjustable-type of V-type Operating handle

For Fixed type, the depth from the circuit breaker mounting surface to the panel board front is fixed. Adjustable-type is used when the depth from the circui... More Details >>
- No：22433
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
ACB　test position

The test position is a position where a main circuit is in the "disconnected" state and only control circuit is in the "connected" state. Control circuit che... More Details >>
- No：22405
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Side by side installation

It is possible to attach closely if there is no problem about the insulation distance between live parts such as a terminal bar and load currents are 80% or ... More Details >>
- No：22400
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers

101-110 of Total 123

Inquiries

page top