AE-SW 4-poles with WS relay (general protection) has overcurrent protection for neutral-pole. The tripping characterist

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified.

Set the handle holder to the right side of the drawout frame with the included screw and nut, and store the drawout hand

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing

Do not take the control power supply of UVT ("Resettable type" and "Reset prevention type") from the secondary side of t

It is possible to reverse-connect if the circuit voltage of UL789 listed products is AC240V or less. Since they are doub

It is possible to attach closely if there is no problem about the insulation distance between live parts such as a termi

It is overcurrent tripping characteristic zone which exceeds the rated current and does not exceed short time tripping z

Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please

The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breake

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

111-120 of Total 124

prev 12 / 13page next

Release element in neutral (4P breaker)

AE-SW 4-poles with WS relay (general protection) has overcurrent protection for neutral-pole. The tripping characteristic is same as phase-pole. Moreover, A... More Details >>
- No：22441
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Default setting of electronic breakers

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified. However, only the pre-alarm is set to... More Details >>
- No：22438
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
ACB How to store drawout handle

Set the handle holder to the right side of the drawout frame with the included screw and nut, and store the drawout handle. However, the circuit breaker with... More Details >>
- No：22437
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Storage temperature range of MCCBs and ELCBs

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing even in a short time. More Details >>
- No：22426
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Where UVT power supplied from?

Do not take the control power supply of UVT ("Resettable type" and "Reset prevention type") from the secondary side of the breakers. If taking the control po... More Details >>
- No：22415
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
UL ELCBs Reverse connection

It is possible to reverse-connect if the circuit voltage of UL789 listed products is AC240V or less. Since they are double standard products of UL/CSA and CE... More Details >>
- No：22411
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Side by side installation

It is possible to attach closely if there is no problem about the insulation distance between live parts such as a terminal bar and load currents are 80% or ... More Details >>
- No：22400
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
LTD operating characteristic

It is overcurrent tripping characteristic zone which exceeds the rated current and does not exceed short time tripping zone (If without short time tripping ,... More Details >>
- No：22384
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Switch disconnector

Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please use it as a switch with large switch... More Details >>
- No：22379
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
ELCB installation

The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breaker. If used on the secondary side of t... More Details >>
- No：22372
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers

111-120 of Total 124

Inquiries

page top