The time between application of voltage to the closing coil (CC) and closing of the main contact is 0.08 sec or less.

First, turn OFF the upstream circuit breaker and the relevant circuit breaker. You must not work in the state where volt

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to pre

The rated current is standard value for continuous current, short time delay current and instantaneous current. Continuo

Use the insulation barrier if they are packed with. If not using that, breaking performance is not guaranteed. For model

It is an earth leakage current (Effective value of residual operating current) which definitely trips Earth Leakage Cir

A circuit breaker must have interrupting ratings. These are classified as rated short-circuit breaking capacities in IEC

AL (Alarm switch) is a switch which electrically displays tripping state of a circuit breaker.The markings of the switch

It is a button in order to trip MCCB. It is used for regular inspection of the switching mechanism, and trip condition o

It is a standard equipment (automatic reset type) and 30ms of one-pulse is output at overload tripping. Hold-type circui

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

11-20 of Total 123

prev 2 / 13page next

ACB closing time

The time between application of voltage to the closing coil (CC) and closing of the main contact is 0.08 sec or less. More Details >>
- No：22440
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Electronic MCCB 400-1600A How to change rated current and characteristic curve (Except CE breakers)

First, turn OFF the upstream circuit breaker and the relevant circuit breaker. You must not work in the state where voltage is applied to the relevant circui... More Details >>
- No：22439
- Release Date：2018/08/31 14:33
- Update：2018/08/31 14:35
- Category： Molded Case Circuit Breakers
Rating of a circuit breaker for transformers primary protection

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to prevent unwanted trip. The selection of ... More Details >>
- No：22343
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Rated current and continuous current

The rated current is standard value for continuous current, short time delay current and instantaneous current. Continuous current is non-breaking current (c... More Details >>
- No：22371
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Insulating barrier in the package

Use the insulation barrier if they are packed with. If not using that, breaking performance is not guaranteed. For models that the insulation barrier is not ... More Details >>
- No：22406
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Rated current sensitivity

It is an earth leakage current (Effective value of residual operating current) which definitely trips Earth Leakage Circuit Breaker and Earth Leakage Relay ... More Details >>
- No：22353
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Interrupting ratings

A circuit breaker must have interrupting ratings. These are classified as rated short-circuit breaking capacities in IEC 60947-2.e rated ultimate short-circu... More Details >>
- No：22341
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
AL

AL (Alarm switch) is a switch which electrically displays tripping state of a circuit breaker.The markings of the switch are 8/ALa, 96/ALb and 95/ALc.*When t... More Details >>
- No：22350
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
How to use Trip button

It is a button in order to trip MCCB. It is used for regular inspection of the switching mechanism, and trip condition of MCCB when Alarm switch (AL) and Shu... More Details >>
- No：22444
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
ACB　OCR alarm

It is a standard equipment (automatic reset type) and 30ms of one-pulse is output at overload tripping. Hold-type circuit is necessary since the output time ... More Details >>
- No：22428
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers

11-20 of Total 123

Inquiries

page top