When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole ty

SHT has a burning prevention switch and it does not burn even if external switch remains "ON" state (After the circuit b

It is a protection method which only trips the related circuit breaker and other fault-free circuit does not trip and co

"a contact" is normally opened contact, and It is also called "NO (Normally Opened) contact".

The degess of protection for ACB is IP20 as standard (under the condition that front door is closed). For MCCB and ELCB,

It is overcurrent tripping characteristic zone which exceeds the rated current and does not exceed short time tripping z

When Power-Fuse (PF) is used as a high-voltage side protection device, coordination with MCCBs on the secondary side sha

It is not possible to use standard AE-SW in DC circuit. Special DC use AE-SW is provided if specified.

It is forbidden to change the characteristic when the breaker ON. Over current trip and earth leakage trip characteristi

No, you must not use 2-pole circuit breaker as 1-pole circuit breaker (series connection as only single phase ). If usin

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

21-30 of Total 123

prev 3 / 13page next

Max. operational voltage for AC/DC Common

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole type is DC400V and 4-pole type is DC500... More Details >>
- No：22445
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
SHT

SHT has a burning prevention switch and it does not burn even if external switch remains "ON" state (After the circuit breaker trips, a burning prevention sw... More Details >>
- No：22355
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Selective coordination

It is a protection method which only trips the related circuit breaker and other fault-free circuit does not trip and continues power supply in the event of... More Details >>
- No：22366
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
A contact of AL/AX

"a contact" is normally opened contact, and It is also called "NO (Normally Opened) contact". More Details >>
- No：22410
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
degrees of protection to　 IEC60529

The degess of protection for ACB is IP20 as standard (under the condition that front door is closed). For MCCB and ELCB, the degrees of protection can be IP2... More Details >>
- No：24812
- Release Date：2019/04/09 15:18
- Category： Molded Case Circuit Breakers
LTD operating characteristic

It is overcurrent tripping characteristic zone which exceeds the rated current and does not exceed short time tripping zone (If without short time tripping ,... More Details >>
- No：22384
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Low-instantaneous trip

When Power-Fuse (PF) is used as a high-voltage side protection device, coordination with MCCBs on the secondary side shall be achieved. Therefore, MCCB has l... More Details >>
- No：22403
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Use in Particular Applications
ACB DC use

It is not possible to use standard AE-SW in DC circuit. Special DC use AE-SW is provided if specified. More Details >>
- No：22446
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Setting change operation while power is on

It is forbidden to change the characteristic when the breaker ON. Over current trip and earth leakage trip characteristics should be changed by a person with... More Details >>
- No：37699
- Release Date：2020/01/18 09:58
- Category： Molded Case Circuit Breakers , Air Circuit Breakers
2P MCCB only 1-pole use

No, you must not use 2-pole circuit breaker as 1-pole circuit breaker (series connection as only single phase ). If using it as 1-pole circuit breaker, these... More Details >>
- No：22382
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers

21-30 of Total 123

Inquiries

page top