It is possible to reverse-connect if the circuit voltage of UL789 listed products is AC240V or less. Since they are doub

It is not possible to combine them at the same time. You need to choose one of them.

It means a space between the edge of a exhaust port and panel component ( such as wall or duct) of a circuit breaker. Th

It is necessary to use AL and AX switches that are suitable for the specification of PLC input unit. Generally AL and AX

When Power-Fuse (PF) is used as a high-voltage side protection device, coordination with MCCBs on the secondary side sha

EAL (Earth Leakage Alarm switch) is a switch that electrically displays tripping state of Earth Leakage Circuit Breaker

This contact(SBC) is used to auxiliary switch(AXb) contact. When Drawout type ACB is moved from "test" position to "disc

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage prot

PAＬ（Pre-Alarm Module

This function is equipped in electronic circuit breaker. It outputs an alarm when pre-alarm current setting current (the

The applicable voltage is 440V or less. Moreover, High-speed type can be used from 85 to 484V, and Time-delay type can b

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

31-40 of Total 123

prev 4 / 13page next

UL ELCBs Reverse connection

It is possible to reverse-connect if the circuit voltage of UL789 listed products is AC240V or less. Since they are double standard products of UL/CSA and CE... More Details >>
- No：22411
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
ACB　combination Ground fault protection and earth leakage protection

It is not possible to combine them at the same time. You need to choose one of them. More Details >>
- No：22419
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Arc space

It means a space between the edge of a exhaust port and panel component ( such as wall or duct) of a circuit breaker. The arc space is needed for smoothly di... More Details >>
- No：22373
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
AL/AX direct connection to PLC

It is necessary to use AL and AX switches that are suitable for the specification of PLC input unit. Generally AL and AX switch for micro-load are used for i... More Details >>
- No：22398
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Low-instantaneous trip

When Power-Fuse (PF) is used as a high-voltage side protection device, coordination with MCCBs on the secondary side shall be achieved. Therefore, MCCB has l... More Details >>
- No：22403
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Use in Particular Applications
EAL

EAL (Earth Leakage Alarm switch) is a switch that electrically displays tripping state of Earth Leakage Circuit Breaker by eartheleakage/ground fault. EAL do... More Details >>
- No：22404
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
ACB　Shorting B contact (SBC)

This contact(SBC) is used to auxiliary switch(AXb) contact. When Drawout type ACB is moved from "test" position to "disconnect" position, AXb contact will b... More Details >>
- No：22416
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
4-pole type in 100VAC or 110VAC

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage protection does not operate. More Details >>
- No：24820
- Release Date：2019/04/09 15:10
- Category： Earth Leakage Circuit Breakers
PAＬ（Pre-Alarm Module）

This function is equipped in electronic circuit breaker. It outputs an alarm when pre-alarm current setting current (the rated current or less) is over and l... More Details >>
- No：22377
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
ELCB applicable voltage

The applicable voltage is 440V or less. Moreover, High-speed type can be used from 85 to 484V, and Time-delay type can be used from 170 to 484V. More Details >>
- No：22421
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers

31-40 of Total 123

Inquiries

page top