PAＬ（Pre-Alarm Module

This function is equipped in electronic circuit breaker. It outputs an alarm when pre-alarm current setting current (the

The rated current is standard value for continuous current, short time delay current and instantaneous current. Continuo

It is a current that does not leak-trip even if there is ground fault current or leakage current. In the standard, it is

At time-delay tripping zone, it operates with bimetal, therefore the characteristics of AC and DC should be same if the

It is an earth leakage current (Effective value of residual operating current) which definitely trips Earth Leakage Cir

Compared with general circuit breakers, Earth Leakage Circuit Breaker applicable to harmonics and surge has earth leakag

It is the Earth Leakage Circuit Breaker with rated residual operating current of 30mA or less.

The maximum operating time of Time-delay type Earth Leakage Circuit Breaker can be switched to 0.45s, 1.0s and 2.0s. The

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1

It is not possible to use standard AE-SW in DC circuit. Special DC use AE-SW is provided if specified.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

41-50 of Total 123

prev 5 / 13page next

PAＬ（Pre-Alarm Module）

This function is equipped in electronic circuit breaker. It outputs an alarm when pre-alarm current setting current (the rated current or less) is over and l... More Details >>
- No：22377
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Rated current and continuous current

The rated current is standard value for continuous current, short time delay current and instantaneous current. Continuous current is non-breaking current (c... More Details >>
- No：22371
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Residual non-operating current

It is a current that does not leak-trip even if there is ground fault current or leakage current. In the standard, it is 50 % of the rated residual operating... More Details >>
- No：22356
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Inst tripping current value of AC/DC common breaker

At time-delay tripping zone, it operates with bimetal, therefore the characteristics of AC and DC should be same if the effective values of them are same. Ho... More Details >>
- No：22392
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Rated current sensitivity

It is an earth leakage current (Effective value of residual operating current) which definitely trips Earth Leakage Circuit Breaker and Earth Leakage Relay ... More Details >>
- No：22353
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
ELCB applicable to harmonics and surge

Compared with general circuit breakers, Earth Leakage Circuit Breaker applicable to harmonics and surge has earth leakage current detecting characteristic wh... More Details >>
- No：22344
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
ELCB High-sensitivity

It is the Earth Leakage Circuit Breaker with rated residual operating current of 30mA or less. More Details >>
- No：22390
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Time Delay type at the maximum operating time

The maximum operating time of Time-delay type Earth Leakage Circuit Breaker can be switched to 0.45s, 1.0s and 2.0s. The operating time is:* when it is 0.45s... More Details >>
- No：22375
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
IEC60947-2 standard

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1000V AC or less, or DC 1500V DC or le... More Details >>
- No：22361
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
ACB DC use

It is not possible to use standard AE-SW in DC circuit. Special DC use AE-SW is provided if specified. More Details >>
- No：22446
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers

41-50 of Total 123

Inquiries

page top