You need to connect the two terminal of No.15, 16 or 18 terminal to theload side of the contactor. (The remaining termin

SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the po

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to

The minimum applicable load is as follows. Contact reliability is indicatedby fault rate λ60 (Number of fault / Operatin

It is the voltage value used for ordering and represents the ratedoperating voltage.

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor b

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magneti

It means the rated operating voltage (nominal voltage) range andfrequency (when AC operation) of a control coil.

It is a current that can be energized for 8 hours without opening/closingthe magnetic contactor and in the state that th

It is the peformance that open/close under the conditions specified in thestandard without energizing a main circuit.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Contactors and Motor Starters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Contactors and Motor Starters

Motor Starters(142)

FAQ within [ Contactors and Motor Starters ]

1-10 of Total 142

prev 1 / 15page next

About Low-voltage Power Distribution Products

You need to connect the two terminal of No.15, 16 or 18 terminal to theload side of the contactor. (The remaining terminal is unnecessary toconnect.) More Details >>
- No：23307
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the positive and A2 (-) to the negative sid... More Details >>
- No：23271
- Release Date：2018/09/12 15:11
- Update：2021/04/09 16:21
- Category： Motor Starters
About Low-voltage Power Distribution Products

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to both side of 3 poles（Between 1/L1-2/... More Details >>
- No：23249
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The minimum applicable load is as follows. Contact reliability is indicatedby fault rate λ60 (Number of fault / Operating cycles per one contact) atthe relia... More Details >>
- No：23320
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the voltage value used for ordering and represents the ratedoperating voltage. More Details >>
- No：23292
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor burnout by heatingand bending a built-... More Details >>
- No：23269
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magnetic contactor increases if thecontact "... More Details >>
- No：23309
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It means the rated operating voltage (nominal voltage) range andfrequency (when AC operation) of a control coil. More Details >>
- No：23266
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is a current that can be energized for 8 hours without opening/closingthe magnetic contactor and in the state that the temperature rise value ofeach part ... More Details >>
- No：23255
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the peformance that open/close under the conditions specified in thestandard without energizing a main circuit. More Details >>
- No：23374
- Release Date：2018/09/12 15:12
- Category： Motor Starters

1-10 of Total 142

Inquiries

page top