When installing a thermal load relay in the delta phase and detectingphase current, you select a heater designation that

It is possible to operate it by using two US-N* type. For the interlock ofboth US-N* type, UA-RE type reversible unit is

The withstand voltage of US-H type is 2.5kV. The applied location is asbelow.1. Between a main circuit terminal and a co

You need to connect the two terminal of No.15, 16 or 18 terminal to theload side of the contactor. (The remaining termin

For our reduced-voltage starter, when the starting time is over 15 sec,you need to review the selection of MCS and the w

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magneti

Inrush current does not flow since the full voltage directly applys theelectromagnet of SD-Q* and only resistance compon

SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the posi

US-H* is designed for a heater load ,and a driving-circuit and selection ofa main circuit element are also designed to a

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Contactors and Motor Starters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Contactors and Motor Starters

Motor Starters(142)

FAQ within [ Contactors and Motor Starters ]

121-130 of Total 142

prev 13 / 15page next

About Low-voltage Power Distribution Products

When installing a thermal load relay in the delta phase and detectingphase current, you select a heater designation that can be set to 1 / √ 3times of the mo... More Details >>
- No：23240
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is possible to operate it by using two US-N* type. For the interlock ofboth US-N* type, UA-RE type reversible unit is used. More Details >>
- No：23375
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

The withstand voltage of US-H type is 2.5kV. The applied location is asbelow.1. Between a main circuit terminal and a control circuit terminal2. Between all ... More Details >>
- No：23344
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

You need to connect the two terminal of No.15, 16 or 18 terminal to theload side of the contactor. (The remaining terminal is unnecessary toconnect.) More Details >>
- No：23307
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

For our reduced-voltage starter, when the starting time is over 15 sec,you need to review the selection of MCS and the wiring between MCD-MCS, and check whet... More Details >>
- No：23267
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

We do not provide it. More Details >>
- No：23355
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magnetic contactor increases if thecontact "... More Details >>
- No：23309
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Inrush current does not flow since the full voltage directly applys theelectromagnet of SD-Q* and only resistance component of theelectromagnet limits the cu... More Details >>
- No：23277
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the positive and A2 (-) to the negative sid... More Details >>
- No：23271
- Release Date：2018/09/12 15:11
- Update：2021/04/09 16:21
- Category： Motor Starters
About Low-voltage Power Distribution Products

US-H* is designed for a heater load ,and a driving-circuit and selection ofa main circuit element are also designed to apply for a heater load andwhen applie... More Details >>
- No：23361
- Release Date：2018/09/12 15:12
- Category： Motor Starters

121-130 of Total 142

Inquiries

page top