The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distri

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magneti

It is the voltage value used for ordering and represents the ratedoperating voltage.

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in th

It is also called jogging and it means frequently opening and closing thestarting currents such as small movement of a m

The permissible variation range of frequency (short time variation) is ±5%.

The fault detection contact of the cooling fan detects the temperature ofthe fin in the solid state contactor and operat

Since the leakage currents exist in a solid state contactor such as US-N/K/H type even when it is "OFF" state, it can no

If both of a closing coil and a tripping coil are continued to excite at thesame time, it will result in coil burnout. Y

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Contactors and Motor Starters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Contactors and Motor Starters

Motor Starters(142)

FAQ within [ Contactors and Motor Starters ]

61-70 of Total 142

prev 7 / 15page next

About Low-voltage Power Distribution Products

The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distribution equipment specifiedin IEC stan... More Details >>
- No：23329
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magnetic contactor increases if thecontact "... More Details >>
- No：23309
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the voltage value used for ordering and represents the ratedoperating voltage. More Details >>
- No：23292
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in the display window, it isreset state, a... More Details >>
- No：23251
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is also called jogging and it means frequently opening and closing thestarting currents such as small movement of a motor. More Details >>
- No：23242
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The permissible variation range of frequency (short time variation) is ±5%. More Details >>
- No：23371
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

The fault detection contact of the cooling fan detects the temperature ofthe fin in the solid state contactor and operates when exceeding thespecified value.... More Details >>
- No：23301
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Since the leakage currents exist in a solid state contactor such as US-N/K/H type even when it is "OFF" state, it can not be used for insulatingload equipmen... More Details >>
- No：23288
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

If both of a closing coil and a tripping coil are continued to excite at thesame time, it will result in coil burnout. You need to design a system thatdoes n... More Details >>
- No：23282
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to both side of 3 poles（Between 1/L1-2/... More Details >>
- No：23249
- Release Date：2018/09/12 15:11
- Category： Motor Starters

61-70 of Total 142

Inquiries

page top