The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distri

It can not be connected in parallel since the characteristics of each US-N/K/H type elements are differenct and the curr

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magneti

You need to connect the two terminal of No.15, 16 or 18 terminal to theload side of the contactor. (The remaining termin

It is a coil that opens/closes a magnetic contactor by magnetizing(applying suction force) or demagnetizing an electroma

Surge voltage occurs due to opening/closing a control coil. Since we donot provide the surge suppressor for a control co

At ambient temperature 40℃, the rated voltage (frequency) is applied to acontrol coil, and after temperature rise and sa

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor b

The temparature rise of a terminal connected by customer is designed tobe under 65℃ according to the standard. For our p

It is a general starting method that applies full voltage to a motor in orderto start and stop. It is also called Full v

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Contactors and Motor Starters > Motor Starters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Motor Starters ]

91-100 of Total 142

prev 10 / 15page next

About Low-voltage Power Distribution Products

The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distribution equipment specifiedin IEC stan... More Details >>
- No：23329
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It can not be connected in parallel since the characteristics of each US-N/K/H type elements are differenct and the currents are unbalanced whenconnecting in... More Details >>
- No：23317
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

This is because the delay time becomes shorter since the rebound force ofa spring against the suction force of a magnetic contactor increases if thecontact "... More Details >>
- No：23309
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

You need to connect the two terminal of No.15, 16 or 18 terminal to theload side of the contactor. (The remaining terminal is unnecessary toconnect.) More Details >>
- No：23307
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It is a coil that opens/closes a magnetic contactor by magnetizing(applying suction force) or demagnetizing an electromagnet core. More Details >>
- No：23303
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

Surge voltage occurs due to opening/closing a control coil. Since we donot provide the surge suppressor for a control coil which is available forthem, you ne... More Details >>
- No：23285
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

At ambient temperature 40℃, the rated voltage (frequency) is applied to acontrol coil, and after temperature rise and saturation, it can operatewithout any t... More Details >>
- No：23278
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor burnout by heatingand bending a built-... More Details >>
- No：23269
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

The temparature rise of a terminal connected by customer is designed tobe under 65℃ according to the standard. For our products, there is nospecification abo... More Details >>
- No：23259
- Release Date：2018/09/12 15:11
About Low-voltage Power Distribution Products

It is a general starting method that applies full voltage to a motor in orderto start and stop. It is also called Full voltage starting. More Details >>
- No：23256
- Release Date：2018/09/12 15:11

91-100 of Total 142

Inquiries

page top