Cause:Incorrect breaker selection(current capacity/drive purpose, etc.). Leakage current due to electrically conductive

Cause:Deterioration in the reducer oil seal. Too much grease was applied. A grease other than the specified grease was a

Cause:[Occurs only when operating manually]•T/B operation error.[Occurs when operating manually and automatically]•Fault

Cause:[Occurs only when operating manually]•T/B operation error.•The enabling device input is open.[Occurs when operatin

Cause:A servo OFF signal(SRVOFF)is being input from an external source. The operating right is not given.(IOENA paramete

Cause:Program error (arithmetic processing, etc.). Teaching operation error. Peripheral equipment is offset. There is a

Cause:CPU has not started up properly.There is no power supply.An instantaneous power cut exceeding the specification le

Cause:The load conditions exceed the specified values(mass, inertia).The load condition settings are not suitable(HNDDAT

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Robots > Industrial/Collaborative Robots-MELFA

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Industrial/Collaborative Robots-MELFA

FAQ within [ Industrial/Collaborative Robots-MELFA ]

11-18 of Total 18

prev 2 / 2page next

The leakage current breaker trips.

Cause:Incorrect breaker selection(current capacity/drive purpose, etc.). Leakage current due to electrically conductive foreign matters(oil/moisture) getting... More Details >>
- No：23173
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
Oil is leaking.

Cause:Deterioration in the reducer oil seal. Too much grease was applied. A grease other than the specified grease was applied. Excess grease left on the uni... More Details >>
- No：23174
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
Brake is not working properly.

Cause:[Occurs only when operating manually]•T/B operation error.[Occurs when operating manually and automatically]•Faulty connection of the cables that run b... More Details >>
- No：23178
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
Brake is not working properly.

Cause:[Occurs only when operating manually]•T/B operation error.•The enabling device input is open.[Occurs when operating manually and automatically]•Faulty ... More Details >>
- No：23183
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
The servo-on cannot be performed.

Cause:A servo OFF signal(SRVOFF)is being input from an external source. The operating right is not given.(IOENA parameters settings/exclusive input and outpu... More Details >>
- No：23170
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
The position becomes offset.

Cause:Program error (arithmetic processing, etc.). Teaching operation error. Peripheral equipment is offset. There is a setting error in the origin position ... More Details >>
- No：23172
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
Operation panel does not display anything.

Cause:CPU has not started up properly.There is no power supply.An instantaneous power cut exceeding the specification level may have occurred.Measures:Check ... More Details >>
- No：23181
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot
The tip of the robot is vibrating.

Cause:The load conditions exceed the specified values(mass, inertia).The load condition settings are not suitable(HNDDAT and WRKDAT settings are not consiste... More Details >>
- No：23169
- Release Date：2018/09/07 16:09
- Category： Vertical type robot , Horizontal type robot , Ceiling mounted, holizontal type robot

11-18 of Total 18

Inquiries

page top