It is a current value that can break ( turning contact "OFF") under theconditions specified in the standard. (In IEC, nu

You can install it as follows.1. Regular installation of the power supply side terminal as the upper partand the load si

It is the peformance that open/close under the conditions specified in thestandard without energizing a main circuit.

Basically you have to consider the effect of harmonic waves, but there are two ways as below. 1. Refer to the recommende

It is the maximum applicable load capacity at rated operational voltage.

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor b

By opening/closing load with SSC of the zero-voltage triggering method, itreduces noise voltage when closing.

1E is a motor protection relay against overload and constraint such as athermal load relay and an electronic motor prote

It is the utilization category for opening/closing a motor load ofsemiconductor contactor specified in IEC60947-4-2. Uti

SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the posi

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

1-10 of Total 322

prev 1 / 33page next

About Low-voltage Power Distribution Products

It is a current value that can break ( turning contact "OFF") under theconditions specified in the standard. (In IEC, number of tests is 50 times) More Details >>
- No：23261
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

You can install it as follows.1. Regular installation of the power supply side terminal as the upper partand the load side terminal as the lower part2. An in... More Details >>
- No：23326
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the peformance that open/close under the conditions specified in thestandard without energizing a main circuit. More Details >>
- No：23374
- Release Date：2018/09/12 15:12
- Category： Motor Starters
How to select at Inverter circuit

Basically you have to consider the effect of harmonic waves, but there are two ways as below. 1. Refer to the recommended rated current by inverter manufactu... More Details >>
- No：22360
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
About Low-voltage Power Distribution Products

It is the maximum applicable load capacity at rated operational voltage. More Details >>
- No：23236
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

When a motor is overcurrent (overload) due to overload, constraint,phase-loss etc, a thermal load relay prevents motor burnout by heatingand bending a built-... More Details >>
- No：23269
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

By opening/closing load with SSC of the zero-voltage triggering method, itreduces noise voltage when closing. More Details >>
- No：23323
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

1E is a motor protection relay against overload and constraint such as athermal load relay and an electronic motor protection relay. 2E is a motorprotection ... More Details >>
- No：23245
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the utilization category for opening/closing a motor load ofsemiconductor contactor specified in IEC60947-4-2. Utilization categoryAC-53a applies for "... More Details >>
- No：23345
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the positive and A2 (-) to the negative sid... More Details >>
- No：23271
- Release Date：2018/09/12 15:11
- Update：2021/04/09 16:21
- Category： Motor Starters

1-10 of Total 322

Inquiries

page top