SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the posi

For other coil designation, it can be calculated as below.1. For S-T* and S-N* type (AC operation type)(1) Input (Instan

A thermal load relay is intended for burnout protection of three-phasesquirrel cage motor. When direct current is applie

At ambient temperature 40℃, the rated voltage (frequency) is applied to acontrol coil, and after temperature rise and sa

The minimum applicable load is as follows. Contact reliability is indicatedby fault rate λ60 (Number of fault / Operatin

Since the permanent magnet is used for the electromagnet part of SD-Qtype, it is necessary to match its polarity with th

Since US-H* tyep is controlled by DC power supply (12 to 24 V DC), it cannot be operated with AC power supply.

When carrying the rated current at ambient temperature of 40℃ (whencarrying the rated heater load), the maximum temparat

US-N* type is controlled by DC power supply (12 to 24 VDC). However,UA-DR1/UA-SH1 driving-unit of option unit make it po

It is a product that can control two main circuit elements independently,and can be downsized when two or more single-po

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

101-110 of Total 322

prev 11 / 33page next

About Low-voltage Power Distribution Products

SD-T12 to T32 and SD-N600, N800 type operation coil terminals have polarity. Connect terminal mumber A1 (+) to the positive and A2 (-) to the negative sid... More Details >>
- No：23271
- Release Date：2018/09/12 15:11
- Update：2021/04/09 16:21
- Category： Motor Starters
About Low-voltage Power Distribution Products

For other coil designation, it can be calculated as below.1. For S-T* and S-N* type (AC operation type)(1) Input (Instantaneous, constant) power consumption ... More Details >>
- No：23275
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

A thermal load relay is intended for burnout protection of three-phasesquirrel cage motor. When direct current is applied to the thermal loadrelay, the opera... More Details >>
- No：23281
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

At ambient temperature 40℃, the rated voltage (frequency) is applied to acontrol coil, and after temperature rise and saturation, it can operatewithout any t... More Details >>
- No：23298
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The minimum applicable load is as follows. Contact reliability is indicatedby fault rate λ60 (Number of fault / Operating cycles per one contact) atthe relia... More Details >>
- No：23320
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Since the permanent magnet is used for the electromagnet part of SD-Qtype, it is necessary to match its polarity with the polarity of the controlcoil. More Details >>
- No：23324
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Since US-H* tyep is controlled by DC power supply (12 to 24 V DC), it cannot be operated with AC power supply. More Details >>
- No：23357
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

When carrying the rated current at ambient temperature of 40℃ (whencarrying the rated heater load), the maximum temparature of cooling finis approximately 100℃. More Details >>
- No：23358
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

US-N* type is controlled by DC power supply (12 to 24 VDC). However,UA-DR1/UA-SH1 driving-unit of option unit make it possible to control byAC power supply (... More Details >>
- No：23359
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is a product that can control two main circuit elements independently,and can be downsized when two or more single-pole type SSCs are used.It is also effe... More Details >>
- No：23376
- Release Date：2018/09/12 15:12
- Category： Motor Starters

101-110 of Total 322

Inquiries

page top