It is overcurrent tripping characteristic zone which exceeds the rated current and does not exceed short time tripping z

It means a space between the edge of a exhaust port and panel component ( such as wall or duct) of a circuit breaker. Th

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply:

This model is compliant with CE marking, UL standard, KC Mark and FCC/IC.

For other coil designation, it can be calculated as below.1. For S-T* and S-N* type (AC operation type)(1) Input (Instan

RC stands for "Rated current" and the thermal load relay is usedaccording to the rated current (Full load current) of a

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in th

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model

It is possible to measure the received energy and the transferred energy separately.

You can install it as follows.1. Regular installation of the power supply side terminal as the upper partand the load si

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

121-130 of Total 322

prev 13 / 33page next

LTD operating characteristic

It is overcurrent tripping characteristic zone which exceeds the rated current and does not exceed short time tripping zone (If without short time tripping ,... More Details >>
- No：22384
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Arc space

It means a space between the edge of a exhaust port and panel component ( such as wall or duct) of a circuit breaker. The arc space is needed for smoothly di... More Details >>
- No：22373
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Measurable minimum load (ME96SS series).

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply: 0 W, Reactive power: 0 var, Apparent... More Details >>
- No：22155
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:04
- Category： Electrical Indicators
Standards for this model (ME96SS series).

This model is compliant with CE marking, UL standard, KC Mark and FCC/IC. More Details >>
- No：22146
- Release Date：2018/08/27 16:41
- Update：2020/04/10 14:27
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

For other coil designation, it can be calculated as below.1. For S-T* and S-N* type (AC operation type)(1) Input (Instantaneous, constant) power consumption ... More Details >>
- No：23275
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

RC stands for "Rated current" and the thermal load relay is usedaccording to the rated current (Full load current) of a motor. More Details >>
- No：23254
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in the display window, it isreset state, a... More Details >>
- No：23251
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
- Category： Electrical Indicators
Measuring received energy and the transferred energy (ME96SS series).

It is possible to measure the received energy and the transferred energy separately. More Details >>
- No：22176
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:53
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

You can install it as follows.1. Regular installation of the power supply side terminal as the upper partand the load side terminal as the lower part2. An in... More Details >>
- No：23326
- Release Date：2018/09/12 15:11
- Category： Motor Starters

121-130 of Total 322

Inquiries

page top