SSR stands for "Solid State Relay" and "SSC" stands for "Solid StateContactor". Basically, SSR means the semiconductor r

The interlock allows only one magnetic starter to be turned"ON" and notanother opposit side magnetic starter in the case

AE-SW 4-poles with WS relay (general protection) has overcurrent protection for neutral-pole. The tripping characterist

It is possible to attach closely if there is no problem about the insulation distance between live parts such as a termi

Operating characteristics described in our catalog (if there is no "Note" particularly) mean operating time when it star

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement valu

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It i

It is not available. All configuration shall be conducted by the customer.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

151-160 of Total 322

prev 16 / 33page next

About Low-voltage Power Distribution Products

SSR stands for "Solid State Relay" and "SSC" stands for "Solid StateContactor". Basically, SSR means the semiconductor relay of smallcapacity 1-pole configur... More Details >>
- No：23246
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The interlock allows only one magnetic starter to be turned"ON" and notanother opposit side magnetic starter in the case that two magneticstarters must not b... More Details >>
- No：23244
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Release element in neutral (4P breaker)

AE-SW 4-poles with WS relay (general protection) has overcurrent protection for neutral-pole. The tripping characteristic is same as phase-pole. Moreover, A... More Details >>
- No：22441
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Side by side installation

It is possible to attach closely if there is no problem about the insulation distance between live parts such as a terminal bar and load currents are 80% or ... More Details >>
- No：22400
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Hot start characteristics

Operating characteristics described in our catalog (if there is no "Note" particularly) mean operating time when it starts to carry current from the conditio... More Details >>
- No：22374
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Register address for active energy monitors in the MODBUS RTU communication (ME96SS series).

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
- No：22184
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:18
- Category： Electrical Indicators
Acquired values through MODBUS RTU.

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement value. Please refer to Section 7.3 of ... More Details >>
- No：22183
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:13
- Category： Electrical Indicators
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
- Category： Electrical Indicators
Checking the set values (ME96SS series).

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
- No：22165
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Setting upon delivery (ME96SS series).

It is not available. All configuration shall be conducted by the customer. More Details >>
- No：22149
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:49
- Category： Electrical Indicators

151-160 of Total 322

Inquiries

page top