SHT has a burning prevention switch and it does not burn even if external switch remains "ON" state (After the circuit b

Earth Leakage Circuit Breaker and Earth Leakage Relay operate at higher than 50% but not exceeding 100% of the rated res

Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please

Only electricians who have enough technical knowledge should change the setting of overcurrent tripping and earth leakag

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified.

In order to prevent breakdowns and human injuries, it is necessary to select a control device having protection structur

It is utilization category specified in IEC 60947-4-1. AC-4 category is usedfor inching or plugging etc.

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in th

It is the limit of operating cycles that a magnetic contactor can be usedwithout any problems under the conditions speci

A thermal load relay is intended for burnout protection of three-phasesquirrel cage motor. When direct current is applie

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

181-190 of Total 322

prev 19 / 33page next

SHT

SHT has a burning prevention switch and it does not burn even if external switch remains "ON" state (After the circuit breaker trips, a burning prevention sw... More Details >>
- No：22355
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Rated current sensitivity

Earth Leakage Circuit Breaker and Earth Leakage Relay operate at higher than 50% but not exceeding 100% of the rated residual operating current IΔn. The eart... More Details >>
- No：22364
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Switch disconnector

Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please use it as a switch with large switch... More Details >>
- No：22379
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Change Electronic relay characteristics when it is energized

Only electricians who have enough technical knowledge should change the setting of overcurrent tripping and earth leakage tripping characteristics. Moreover,... More Details >>
- No：22409
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Default setting of electronic breakers

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified. However, only the pre-alarm is set to... More Details >>
- No：22438
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Degree of protection

In order to prevent breakdowns and human injuries, it is necessary to select a control device having protection structure suitable for each purpose. The prot... More Details >>
- No：22443
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
About Low-voltage Power Distribution Products

It is utilization category specified in IEC 60947-4-1. AC-4 category is usedfor inching or plugging etc. More Details >>
- No：23250
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in the display window, it isreset state, a... More Details >>
- No：23251
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the limit of operating cycles that a magnetic contactor can be usedwithout any problems under the conditions specified in the standard. More Details >>
- No：23265
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

A thermal load relay is intended for burnout protection of three-phasesquirrel cage motor. When direct current is applied to the thermal loadrelay, the opera... More Details >>
- No：23281
- Release Date：2018/09/12 15:11
- Category： Motor Starters

181-190 of Total 322

Inquiries

page top