Since a triac element in UT-SY21 type and UN-SY11/21/31 canopen/close, surge voltage does not occur. Therefore, a coil s

The contacts are closed by electrical (closing coil) or mechanical operationand even if the operating force is removed,

Cold start operating characteristic is the operating time from flowingcurrents to operating while a heater temparature o

The number of trip durability by using SHT and UVT is 10% of the opening/closing number including the number of trips by

The test position is a position where a main circuit is in the "disconnected" state and only control circuit is in the "

It is the Earth Leakage Circuit Breaker with rated residual operating current of 30mA or less.

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.)

It is a tripping zone which instantly trips, when significantly overcurrent such as short-circuit currents flow.

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

181-190 of Total 322

prev 19 / 33page next

About Low-voltage Power Distribution Products

Since a triac element in UT-SY21 type and UN-SY11/21/31 canopen/close, surge voltage does not occur. Therefore, a coil surgesuppressor is not needed for them. More Details >>
- No：23300
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The contacts are closed by electrical (closing coil) or mechanical operationand even if the operating force is removed, the closed state is maintainedby the ... More Details >>
- No：23253
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Cold start operating characteristic is the operating time from flowingcurrents to operating while a heater temparature of a thermal load relay isthe same as ... More Details >>
- No：23243
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Lifetime with SHT or UVT

The number of trip durability by using SHT and UVT is 10% of the opening/closing number including the number of trips by overcurrent, trip button and test bu... More Details >>
- No：22407
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
ACB　test position

The test position is a position where a main circuit is in the "disconnected" state and only control circuit is in the "connected" state. Control circuit che... More Details >>
- No：22405
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
ELCB High-sensitivity

It is the Earth Leakage Circuit Breaker with rated residual operating current of 30mA or less. More Details >>
- No：22390
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Use in 40℃～60℃

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.) In the case that the ambient temperat... More Details >>
- No：22370
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Instantaneous tripping

It is a tripping zone which instantly trips, when significantly overcurrent such as short-circuit currents flow. More Details >>
- No：22363
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators

181-190 of Total 322

Inquiries

page top