It is a current value that can break ( turning contact "OFF") under theconditions specified in the standard. (In IEC, nu

The minimum applicable load is 20V, 3mA . Contact reliability is indicatedby fault rate λ60 (Number of fault / Operating

The Earth Leakaga Circuit Breaker does not work since leakage current ofSSC is the current flowing from the main circuit

Transformers, wires and welded materials may be damaged if an abnormal energization occurs exceeding the energization cy

When carrying the rated current at ambient temperature of 40℃ (whencarrying the rated heater load), the maximum temparat

It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breake

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 second

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-dig

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

11-20 of Total 322

prev 2 / 33page next

About Low-voltage Power Distribution Products

It is a current value that can break ( turning contact "OFF") under theconditions specified in the standard. (In IEC, number of tests is 50 times) More Details >>
- No：23261
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The minimum applicable load is 20V, 3mA . Contact reliability is indicatedby fault rate λ60 (Number of fault / Operating cycles per one contact) atthe reliab... More Details >>
- No：23304
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The Earth Leakaga Circuit Breaker does not work since leakage current ofSSC is the current flowing from the main circuit element to the load sidewhen opening. More Details >>
- No：23338
- Release Date：2018/09/12 15:12
- Category： Motor Starters
How to use NV250-WEV

Transformers, wires and welded materials may be damaged if an abnormal energization occurs exceeding the energization cycles that are set for the inverter we... More Details >>
- No：22393
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Use in Particular Applications
About Low-voltage Power Distribution Products

When carrying the rated current at ambient temperature of 40℃ (whencarrying the rated heater load), the maximum temparature of cooling finis approximately 100℃. More Details >>
- No：23358
- Release Date：2018/09/12 15:12
- Category： Motor Starters
Inverse time delay operating characteristic

It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breakers, protection characteristic meeting... More Details >>
- No：22387
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Response speed of the analog output (ME96SS series).

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds or less. More Details >>
- No：22157
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:12
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to both side of 3 poles（Between 1/L1-2/... More Details >>
- No：23249
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators

11-20 of Total 322

Inquiries

page top