It is a circuit flowing large current (several A to approximately 1000A)such as a motor and a lighting circuit, and a ma

It is necessary to change the wires connected by solder to the board of theDL circuit since the wire length is short. Th

In the withstand voltage test, 2500V is applied for 1 min. The appliedlocation is as follows.1. Between the conductive p

US-N* and US-H* type are compatible with IEC 60947-4-2(US-N* type)and IEC 60947-4-3(US-N／H type). US-N* type is also com

It is a product that can control two main circuit elements independently,and can be downsized when two or more single-po

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage prot

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system.

It is no influence on operating and characteristics even in the following cases. 1. Overcurrent 20 times of rated curr

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to pre

It is voltage which ensures withstand voltage and it is used as basis to determine insulation distance.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

211-220 of Total 322

prev 22 / 33page next

About Low-voltage Power Distribution Products

It is a circuit flowing large current (several A to approximately 1000A)such as a motor and a lighting circuit, and a main contact (Betweenterminal number 1/... More Details >>
- No：23260
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is necessary to change the wires connected by solder to the board of theDL circuit since the wire length is short. Therefore, it is not possible toconnect... More Details >>
- No：23299
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

In the withstand voltage test, 2500V is applied for 1 min. The appliedlocation is as follows.1. Between the conductive part and the grounded metal part, and ... More Details >>
- No：23305
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

US-N* and US-H* type are compatible with IEC 60947-4-2(US-N* type)and IEC 60947-4-3(US-N／H type). US-N* type is also compatible withUL, TUV, EC and CCC. More Details >>
- No：23349
- Release Date：2018/09/12 15:12
- Update：2021/04/14 09:57
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is a product that can control two main circuit elements independently,and can be downsized when two or more single-pole type SSCs are used.It is also effe... More Details >>
- No：23376
- Release Date：2018/09/12 15:12
- Category： Motor Starters
4-pole type in 100VAC or 110VAC

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage protection does not operate. More Details >>
- No：24820
- Release Date：2019/04/09 15:10
- Category： Earth Leakage Circuit Breakers
Availability for direct measurement of 400V loads (ME96SS series).

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system. More Details >>
- No：22150
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Tolerance for overload (ME96SS series).

It is no influence on operating and characteristics even in the following cases. 1. Overcurrent 20 times of rated current is applied for 0.5 second. 2. Ov... More Details >>
- No：22159
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Rating of a circuit breaker for transformers primary protection

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to prevent unwanted trip. The selection of ... More Details >>
- No：22343
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Rated insulation voltage

It is voltage which ensures withstand voltage and it is used as basis to determine insulation distance. More Details >>
- No：22362
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers

211-220 of Total 322

Inquiries

page top