For US-N/K/H type, since current is opened/closed by semiconductorelement, there is no lifetime related to operating cyc

The contacts are closed by electrical (closing coil) or mechanical operationand even if the operating force is removed,

The applicable voltage is 440V or less. Moreover, High-speed type can be used from 85 to 484V, and Time-delay type can b

It is possible to modify to Rear-connection type by Mitsubishi's certified staff.

It is Earth Leakage Circuit Breaker that the earth leakage trip operating time at the rated residual operating current (

It may not trip a fault current or degrade insulation after tripping. When you connect the device in reverse, you must s

A circuit breaker must have interrupting ratings. These are classified as rated short-circuit breaking capacities in IEC

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (T

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply:

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

211-220 of Total 322

prev 22 / 33page next

About Low-voltage Power Distribution Products

For US-N/K/H type, since current is opened/closed by semiconductorelement, there is no lifetime related to operating cycles, but werecommend to replace in 10... More Details >>
- No：23274
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The contacts are closed by electrical (closing coil) or mechanical operationand even if the operating force is removed, the closed state is maintainedby the ... More Details >>
- No：23253
- Release Date：2018/09/12 15:11
- Category： Motor Starters
ELCB applicable voltage

The applicable voltage is 440V or less. Moreover, High-speed type can be used from 85 to 484V, and Time-delay type can be used from 170 to 484V. More Details >>
- No：22421
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Front to rear connection

It is possible to modify to Rear-connection type by Mitsubishi's certified staff. More Details >>
- No：22399
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
High-speed residual operate CBR

It is Earth Leakage Circuit Breaker that the earth leakage trip operating time at the rated residual operating current (IΔn) is within 0.1 sec, and the earth... More Details >>
- No：22380
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Wrong connection in reverse

It may not trip a fault current or degrade insulation after tripping. When you connect the device in reverse, you must select a reverse-connectable model. More Details >>
- No：22345
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Interrupting ratings

A circuit breaker must have interrupting ratings. These are classified as rated short-circuit breaking capacities in IEC 60947-2.e rated ultimate short-circu... More Details >>
- No：22341
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Register address for active energy monitors in the MODBUS RTU communication (ME96SS series).

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
- No：22184
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:18
- Category： Electrical Indicators
Compensation for power failure (ME96SS series).

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (The main body does not use a battery.)... More Details >>
- No：22163
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:16
- Category： Electrical Indicators
Measurable minimum load (ME96SS series).

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply: 0 W, Reactive power: 0 var, Apparent... More Details >>
- No：22155
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:04
- Category： Electrical Indicators

211-220 of Total 322

Inquiries

page top