A circuit breaker shall be Trip position when installing Cassette type accessory. The breaker may be damaged if installi

Please check the register addresses. The register address for the present value of the power factor of each phase is “

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring.

The main part of SRT(D)-NF type is a special product and different fromthe standard product relay (SR(D)-N type). Theref

It stops a motor rapidly by reversing connetion of a contact.

The temparature rise of a terminal connected by customer is designed tobe under 65℃ according to the standard. For our p

When installing a thermal load relay in the delta phase and detectingphase current, you select a heater designation that

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified.

Please check the register addresses. The register address for the present value of the power factor of each phase is

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

221-230 of Total 322

prev 23 / 33page next

How to install cassette type accessories

A circuit breaker shall be Trip position when installing Cassette type accessory. The breaker may be damaged if installing in "ON" or "OFF" position. Moreove... More Details >>
- No：22422
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Operation at the reversed phase connection (ME96SS series).

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
- No：22170
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:41
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

The main part of SRT(D)-NF type is a special product and different fromthe standard product relay (SR(D)-N type). Therefore, we do not providethe timer unit ... More Details >>
- No：23264
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It stops a motor rapidly by reversing connetion of a contact. More Details >>
- No：23262
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The temparature rise of a terminal connected by customer is designed tobe under 65℃ according to the standard. For our products, there is nospecification abo... More Details >>
- No：23259
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

When installing a thermal load relay in the delta phase and detectingphase current, you select a heater designation that can be set to 1 / √ 3times of the mo... More Details >>
- No：23240
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Default setting of electronic breakers

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified. However, only the pre-alarm is set to... More Details >>
- No：22438
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
MCCB, ELCB and ACB at higher altitudes

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below. More Details >>
- No：24801
- Release Date：2019/04/09 15:17
- Category： Molded Case Circuit Breakers

221-230 of Total 322

Inquiries

page top