Bar terminal material for 400A is aluminum alloy, and for 630A or higher is copper.

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage prot

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to pre

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with

A circuit breaker shall be Trip position when installing Cassette type accessory. The breaker may be damaged if installi

"b contact" is normally closed contact, and It is also called "NC (Normally Closed) contact".

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified.

It is a value of voltage which determines the application related to closingcapacity, breaking capacity, opening/closing

The short-circuit withstand capacity of the semiconductor in US-N/K/Htype solid state contactor is specified and the flo

It is not possible to replace it since we do not sell it as a unit.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

231-240 of Total 322

prev 24 / 33page next

MCCB bar terminal material

Bar terminal material for 400A is aluminum alloy, and for 630A or higher is copper. More Details >>
- No：24819
- Release Date：2019/04/09 15:13
- Category： Molded Case Circuit Breakers
4-pole type in 100VAC or 110VAC

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage protection does not operate. More Details >>
- No：24820
- Release Date：2019/04/09 15:10
- Category： Earth Leakage Circuit Breakers
Rating of a circuit breaker for transformers primary protection

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to prevent unwanted trip. The selection of ... More Details >>
- No：22343
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Micro-load AL and AX switch

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with the standards (CE marking product an... More Details >>
- No：22413
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
How to install cassette type accessories

A circuit breaker shall be Trip position when installing Cassette type accessory. The breaker may be damaged if installing in "ON" or "OFF" position. Moreove... More Details >>
- No：22422
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
B contact of AL/AX

"b contact" is normally closed contact, and It is also called "NC (Normally Closed) contact". More Details >>
- No：22435
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Default setting of electronic breakers

Each setting knob of the overcurrent trip characteristic is set to the maximum value and then shipped if not specified. However, only the pre-alarm is set to... More Details >>
- No：22438
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
About Low-voltage Power Distribution Products

It is a value of voltage which determines the application related to closingcapacity, breaking capacity, opening/closing frequency andopening/closing durabil... More Details >>
- No：23247
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The short-circuit withstand capacity of the semiconductor in US-N/K/Htype solid state contactor is specified and the flowing current at short-circuit must no... More Details >>
- No：23280
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is not possible to replace it since we do not sell it as a unit. More Details >>
- No：23369
- Release Date：2018/09/12 15:12
- Category： Motor Starters

231-240 of Total 322

Inquiries

page top