Operating characteristics described in our catalog (if there is no "Note" particularly) mean operating time when it star

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.)

It is a tripping zone which instantly trips, when significantly overcurrent such as short-circuit currents flow.

We don't provide the earth leakage circuit beaker for PV power. Please use a general leakage circuit breaker. However, y

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to pre

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement va

It is possible to measure the received energy and the transferred energy separately.

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And t

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

241-250 of Total 322

prev 25 / 33page next

Hot start characteristics

Operating characteristics described in our catalog (if there is no "Note" particularly) mean operating time when it starts to carry current from the conditio... More Details >>
- No：22374
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Use in 40℃～60℃

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.) In the case that the ambient temperat... More Details >>
- No：22370
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Instantaneous tripping

It is a tripping zone which instantly trips, when significantly overcurrent such as short-circuit currents flow. More Details >>
- No：22363
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
PV use MCCB

We don't provide the earth leakage circuit beaker for PV power. Please use a general leakage circuit breaker. However, you need to select a reverse-connectab... More Details >>
- No：22348
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Use in Particular Applications
Rating of a circuit breaker for transformers primary protection

When making a transformer to energize, a large inrush current may flow. The circuit breaker is therefore required to prevent unwanted trip. The selection of ... More Details >>
- No：22343
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Acquired values through MODBUS RTU.

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement value. Please refer to Section 7.3 of ... More Details >>
- No：22183
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:13
- Category： Electrical Indicators
Measuring received energy and the transferred energy (ME96SS series).

It is possible to measure the received energy and the transferred energy separately. More Details >>
- No：22176
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:53
- Category： Electrical Indicators
Display upon upper/lower limit alarm (ME96SS series).

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And the “ALARM” indication and the “HI” in... More Details >>
- No：22169
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:36
- Category： Electrical Indicators
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators
Availability of an option for ME96NS Series (ME96SS series).

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT be installed to the main body of ME9... More Details >>
- No：22162
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators

241-250 of Total 322

Inquiries

page top