When carrying the rated current at ambient temperature of 40℃, themaximum temparature of cooling fin is approximately 90

US-H* is designed for a heater load ,and a driving-circuit and selection ofa main circuit element are also designed to a

The degess of protection for ACB is IP20 as standard (under the condition that front door is closed). For MCCB and ELCB,

Flatness of mounting plane: 1 mm or less. In addition, it is necessary to consider the horizontality of the panel.

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without pay

A shunt trip (SHT) is an internal accessory which electrically and remotely trips a circuit breaker. When the supply vol

Basically you have to consider the effect of harmonic waves, but there are two ways as below. 1. Refer to the recommende

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1

The applicable voltage is 440V or less. Moreover, High-speed type can be used from 85 to 484V, and Time-delay type can b

Set the handle holder to the right side of the drawout frame with the included screw and nut, and store the drawout hand

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

261-270 of Total 322

prev 27 / 33page next

About Low-voltage Power Distribution Products

When carrying the rated current at ambient temperature of 40℃, themaximum temparature of cooling fin is approximately 90℃. More Details >>
- No：23360
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

US-H* is designed for a heater load ,and a driving-circuit and selection ofa main circuit element are also designed to apply for a heater load andwhen applie... More Details >>
- No：23361
- Release Date：2018/09/12 15:12
- Category： Motor Starters
degrees of protection to　 IEC60529

The degess of protection for ACB is IP20 as standard (under the condition that front door is closed). For MCCB and ELCB, the degrees of protection can be IP2... More Details >>
- No：24812
- Release Date：2019/04/09 15:18
- Category： Molded Case Circuit Breakers
Horizontal allowable distance when installing ACB

Flatness of mounting plane: 1 mm or less.In addition, it is necessary to consider the horizontality of the panel. More Details >>
- No：37698
- Release Date：2020/01/17 17:32
- Category： Air Circuit Breakers
Check the measurement values using MODBUS RTU communication

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without payment from the following Web site. ... More Details >>
- No：37812
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
How to use SHT

A shunt trip (SHT) is an internal accessory which electrically and remotely trips a circuit breaker. When the supply voltage of the SHT is remained between 7... More Details >>
- No：22342
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
How to select at Inverter circuit

Basically you have to consider the effect of harmonic waves, but there are two ways as below. 1. Refer to the recommended rated current by inverter manufactu... More Details >>
- No：22360
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
IEC60947-2 standard

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1000V AC or less, or DC 1500V DC or le... More Details >>
- No：22361
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
ELCB applicable voltage

The applicable voltage is 440V or less. Moreover, High-speed type can be used from 85 to 484V, and Time-delay type can be used from 170 to 484V. More Details >>
- No：22421
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
ACB How to store drawout handle

Set the handle holder to the right side of the drawout frame with the included screw and nut, and store the drawout handle. However, the circuit breaker with... More Details >>
- No：22437
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers

261-270 of Total 322

Inquiries

page top