They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two p

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V, Power supply: 0 W

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without paymen

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrume

In the withstand voltage test, AC 1500V is applied for 1 min However, apressurizing part is only between a terminal part

Wiring of control circuit will be changed depending on whether the maincircuit voltage and control voltage are the same

At ambient temperature 40℃, the rated voltage (frequency) is applied to acontrol coil, and after temperature rise and sa

It is utilization category specified in IEC 60947-4-1. AC-1 category is usedfor heater or resistive load etc.

It is a starting method that motor winding is star-connected and startingcurrent is set as one-third of direct-on-line a

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

261-270 of Total 322

prev 27 / 33page next

Installation compatibility with ME96NSR (ME96SS series).

They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two points with mounting brackets.) More Details >>
- No：22160
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Measurable minimum voltage (ME96SS series).

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V,Power supply: 0 W, Reactive power: 0 var, Apparent pow... More Details >>
- No：22156
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:08
- Category： Electrical Indicators
Check the measurement values using MODBUS RTU communication

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without payment from the following Web site. ... More Details >>
- No：37812
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Display digit of ACTIVE ENERGY

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrument User's Manual which you use. ・El... More Details >>
- No：24809
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

In the withstand voltage test, AC 1500V is applied for 1 min However, apressurizing part is only between a terminal part (conductive part) and amounting surf... More Details >>
- No：23377
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

Wiring of control circuit will be changed depending on whether the maincircuit voltage and control voltage are the same or different. More Details >>
- No：23356
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

At ambient temperature 40℃, the rated voltage (frequency) is applied to acontrol coil, and after temperature rise and saturation, it can operatewithout any t... More Details >>
- No：23278
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is utilization category specified in IEC 60947-4-1. AC-1 category is usedfor heater or resistive load etc. More Details >>
- No：23248
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is a starting method that motor winding is star-connected and startingcurrent is set as one-third of direct-on-line and then it is delta-connectedafter ac... More Details >>
- No：23237
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Storage temperature range of MCCBs and ELCBs

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing even in a short time. More Details >>
- No：22426
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers

261-270 of Total 322

Inquiries

page top