You can install it as follows.1. Regular installation of the power supply side terminal as the upper partand the load si

It is the utilization category for opening/closing a heater load ofsemiconductor contactor specified in IEC60947-4-3. Ut

There is no polarity in the control coil.

The minimum applicable load voltage and current are as follows. Contactreliability is indicated by fault rate λ60 (Numbe

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model

It is possible to produce, however, it may cause unnecessary trippingwhen using inching.

It is not possible to replace by customer since the magnetic contactorsused for S-T*DL type and S-N*DL type are differen

It is time from magnetizing or demagnetizing a control coil to operatingcontact (turning contact "ON" or "OFF").

It is a current value that can be closed (turning contact "ON") under theconditions specified in the standards. (In IEC,

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

281-290 of Total 322

prev 29 / 33page next

About Low-voltage Power Distribution Products

You can install it as follows.1. Regular installation of the power supply side terminal as the upper partand the load side terminal as the lower part2. An in... More Details >>
- No：23326
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the utilization category for opening/closing a heater load ofsemiconductor contactor specified in IEC60947-4-3. Utilization categoryAC-51 applies for "... More Details >>
- No：23318
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

There is no polarity in the control coil. More Details >>
- No：23311
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

The minimum applicable load voltage and current are as follows. Contactreliability is indicated by fault rate λ60 (Number of faults / Operatingcycles per one... More Details >>
- No：23290
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

It is possible to produce, however, it may cause unnecessary trippingwhen using inching. More Details >>
- No：23373
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is not possible to replace by customer since the magnetic contactorsused for S-T*DL type and S-N*DL type are different from the standardtype in the specif... More Details >>
- No：23354
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is time from magnetizing or demagnetizing a control coil to operatingcontact (turning contact "ON" or "OFF"). More Details >>
- No：23343
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is a current value that can be closed (turning contact "ON") under theconditions specified in the standards. (In IEC, number of tests is 50times) More Details >>
- No：23294
- Release Date：2018/09/12 15:11
- Category： Motor Starters

281-290 of Total 322

Inquiries

page top