The test position is a position where a main circuit is in the "disconnected" state and only control circuit is in the "

It is an earth leakage current (Effective value of residual operating current) which definitely trips Earth Leakage Cir

PAＬ（Pre-Alarm Module

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for sec

It is a current that does not leak-trip even if there is ground fault current or leakage current. In the standard, it is

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

It is the peformance that open/close under the conditions specified in thestandard without energizing a main circuit.

Almost ELCBs can be connected n reverse. Check the item column of specification table "reverse connection (below 230 V A

The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breake

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model.

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 s

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

21-30 of Total 322

prev 3 / 33page next

ACB　test position

The test position is a position where a main circuit is in the "disconnected" state and only control circuit is in the "connected" state. Control circuit che... More Details >>
- No：22405
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Rated current sensitivity

It is an earth leakage current (Effective value of residual operating current) which definitely trips Earth Leakage Circuit Breaker and Earth Leakage Relay ... More Details >>
- No：22353
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
PAＬ（Pre-Alarm Module）

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for securing continuous power supply and pre... More Details >>
- No：22376
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Residual non-operating current

It is a current that does not leak-trip even if there is ground fault current or leakage current. In the standard, it is 50 % of the rated residual operating... More Details >>
- No：22356
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

It is the peformance that open/close under the conditions specified in thestandard without energizing a main circuit. More Details >>
- No：23374
- Release Date：2018/09/12 15:12
- Category： Motor Starters
ELCB reverse connection

Almost ELCBs can be connected n reverse. Check the item column of specification table "reverse connection (below 230 V AC)" in the catalog. If it says "Possi... More Details >>
- No：22434
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
ELCB installation

The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breaker. If used on the secondary side of t... More Details >>
- No：22372
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Error in the measurement value (ME96SS series).

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model. More Details >>
- No：22179
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Wire length for analog output and contact output（ME96SS series）

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 series is no-voltage "a" contact. The... More Details >>
- No：24807
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators

21-30 of Total 322

Inquiries

page top