It is same as the maximum rated operational voltage.

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) O

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below.

It is the limit of operating cycles that a magnetic contactor can be usedwithout any problems under the conditions speci

Please check the register addresses. The register address for the present value of the power factor of each phase is “

It is possible to measure the received energy and the transferred energy separately.

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage prot

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-dig

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of ac

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

291-300 of Total 322

prev 30 / 33page next

ELCB Rated insulation voltage

It is same as the maximum rated operational voltage. More Details >>
- No：22365
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
The operating/storage temperature and humidity

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Operating humidity range: 0% to 85% an... More Details >>
- No：22153
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:56
- Category： Electrical Indicators
MCCB, ELCB and ACB at higher altitudes

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below. More Details >>
- No：24801
- Release Date：2019/04/09 15:17
- Category： Molded Case Circuit Breakers
About Low-voltage Power Distribution Products

It is the limit of operating cycles that a magnetic contactor can be usedwithout any problems under the conditions specified in the standard. More Details >>
- No：23265
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Measuring received energy and the transferred energy (ME96SS series).

It is possible to measure the received energy and the transferred energy separately. More Details >>
- No：22176
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:53
- Category： Electrical Indicators
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators
4-pole type in 100VAC or 110VAC

The rated operational voltages for them are 200 to 440VAC. If using them in 100VAC or 110VAC circuit, earth-leakage protection does not operate. More Details >>
- No：24820
- Release Date：2019/04/09 15:10
- Category： Earth Leakage Circuit Breakers
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators
Checking non-displayed digit of active energy (ME96SS series).

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
- No：22172
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:44
- Category： Electrical Indicators

291-300 of Total 322

Inquiries

page top