It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 uni

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-dig

MODBUS RTU communication and MODBUS TCP communication can be used at the same time.

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement va

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This mode

It is possible to measure the received energy and the transferred energy separately.

This model has “Motor Starting Current Mask Function”. This function stops the alarm output and updating of the maximum

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.)

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st • Effective value and distorti

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

291-300 of Total 322

prev 30 / 33page next

Connectable number of MODBUS RTU (ME96SS series).

It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 units + 31 units + 2 units) More Details >>
- No：22190
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators
Concurrent-use of MODBUS RTU and MODBUS TCP (ME96SS series).

MODBUS RTU communication and MODBUS TCP communication can be used at the same time. More Details >>
- No：22188
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Acquired values through MODBUS RTU.

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement value. Please refer to Section 7.3 of ... More Details >>
- No：22183
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:13
- Category： Electrical Indicators
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
- Category： Electrical Indicators
Measuring received energy and the transferred energy (ME96SS series).

It is possible to measure the received energy and the transferred energy separately. More Details >>
- No：22176
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:53
- Category： Electrical Indicators
Disable an alarm for motor starting current (ME96SS series).

This model has “Motor Starting Current Mask Function”. This function stops the alarm output and updating of the maximum values during the setting time when a... More Details >>
- No：22175
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:51
- Category： Electrical Indicators
Wiring for only measuring current (ME96SS series).

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.) More Details >>
- No：22174
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:50
- Category： Electrical Indicators
Measuring harmonics range (ME96SS series).

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st •Effective value and distortion rate. • Harmonic current and Harmonic... More Details >>
- No：22173
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:46
- Category： Electrical Indicators

291-300 of Total 322

Inquiries

page top