This model is compliant with CE marking, UL standard, KC Mark and FCC/IC.

It is not possible to combine them at the same time. You need to choose one of them.

Earth Leakage Circuit Breaker and Earth Leakage Relay operate at higher than 50% but not exceeding 100% of the rated res

The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breake

The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distri

It is a value of voltage which determines the application related to closingcapacity, breaking capacity, opening/closing

It is a current that does not leak-trip even if there is ground fault current or leakage current. In the standard, it is

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in th

It is a button in order to mechanically trip a circuit breaker outside. It is used to confirm switching mechanism at the

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 s

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

31-40 of Total 322

prev 4 / 33page next

Standards for this model (ME96SS series).

This model is compliant with CE marking, UL standard, KC Mark and FCC/IC. More Details >>
- No：22146
- Release Date：2018/08/27 16:41
- Update：2020/04/10 14:27
- Category： Electrical Indicators
ACB　combination Ground fault protection and earth leakage protection

It is not possible to combine them at the same time. You need to choose one of them. More Details >>
- No：22419
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Rated current sensitivity

Earth Leakage Circuit Breaker and Earth Leakage Relay operate at higher than 50% but not exceeding 100% of the rated residual operating current IΔn. The eart... More Details >>
- No：22364
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
ELCB installation

The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breaker. If used on the secondary side of t... More Details >>
- No：22372
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
About Low-voltage Power Distribution Products

The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distribution equipment specifiedin IEC stan... More Details >>
- No：23329
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is a value of voltage which determines the application related to closingcapacity, breaking capacity, opening/closing frequency andopening/closing durabil... More Details >>
- No：23247
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Residual non-operating current

It is a current that does not leak-trip even if there is ground fault current or leakage current. In the standard, it is 50 % of the rated residual operating... More Details >>
- No：22356
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
About Low-voltage Power Distribution Products

You can make sure with a display window beside the adjustment knob ofthe thermal load relay. If green is displayed in the display window, it isreset state, a... More Details >>
- No：23251
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Trip button

It is a button in order to mechanically trip a circuit breaker outside. It is used to confirm switching mechanism at the regular maintenance or sequence-chec... More Details >>
- No：22368
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Wire length for analog output and contact output（ME96SS series）

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 series is no-voltage "a" contact. The... More Details >>
- No：24807
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators

31-40 of Total 322

Inquiries

page top