When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole ty

PAＬ（Pre-Alarm Module

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for sec

With ME96SS ver.B, four measurement values can be checked digitally on one screen. For models before ME96SS ver.B, up to

The minimum applicable load voltage and current are as follows. Contactreliability is indicated by fault rate λ60 (Numbe

If switching of neutral pole is not needed, it is possible to use 3-pole MCCB for 3-phase 4- wire circuit. Generally, it

It means a space between the edge of a exhaust port and panel component ( such as wall or duct) of a circuit breaker. Th

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required

It is utilization category specified in IEC 60947-4-1. AC-1 category is usedfor heater or resistive load etc.

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrume

The main part of SRT(D)-NF type is a special product and different fromthe standard product relay (SR(D)-N type). Theref

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

51-60 of Total 322

prev 6 / 33page next

Max. operational voltage for AC/DC Common

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole type is DC400V and 4-pole type is DC500... More Details >>
- No：22445
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
PAＬ（Pre-Alarm Module）

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for securing continuous power supply and pre... More Details >>
- No：22376
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
One screen display feature

With ME96SS ver.B, four measurement values can be checked digitally on one screen. For models before ME96SS ver.B, up to three measured values can be checked... More Details >>
- No：37806
- Release Date：2020/04/10 15:09
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

The minimum applicable load voltage and current are as follows. Contactreliability is indicated by fault rate λ60 (Number of faults / Operatingcycles per one... More Details >>
- No：23290
- Release Date：2018/09/12 15:11
- Category： Motor Starters
MCCB 3P4W 3P use

If switching of neutral pole is not needed, it is possible to use 3-pole MCCB for 3-phase 4- wire circuit. Generally, it is recommended to use 4-pole circuit... More Details >>
- No：22385
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Arc space

It means a space between the edge of a exhaust port and panel component ( such as wall or duct) of a circuit breaker. The arc space is needed for smoothly di... More Details >>
- No：22373
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Read data stored by the built-in logging function

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required. It is not available with MOD... More Details >>
- No：37808
- Release Date：2020/04/10 15:09
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

It is utilization category specified in IEC 60947-4-1. AC-1 category is usedfor heater or resistive load etc. More Details >>
- No：23248
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Display digit of ACTIVE ENERGY

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrument User's Manual which you use. ・El... More Details >>
- No：24809
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

The main part of SRT(D)-NF type is a special product and different fromthe standard product relay (SR(D)-N type). Therefore, we do not providethe timer unit ... More Details >>
- No：23264
- Release Date：2018/09/12 15:11
- Category： Motor Starters

51-60 of Total 322

Inquiries

page top