Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please

PAＬ（Pre-Alarm Module

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for sec

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit

It is possible. Refer to the figure for connection as below.

A thermal load relay is intended for burnout protection of three-phasesquirrel cage motor. When direct current is applie

For ACB, Line and Load are not defined on the main circuit terminals. Reverse connection is available without any limita

Use with 24V, 0.5A or more for AC and DC in normal use. If the breakers are used less than 24V, use with 6V, 1A or more.

It is necessary to use AL and AX switches that are suitable for the specification of PLC input unit. Generally AL and AX

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.)

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

71-80 of Total 322

prev 8 / 33page next

Switch disconnector

Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please use it as a switch with large switch... More Details >>
- No：22379
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
PAＬ（Pre-Alarm Module）

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for securing continuous power supply and pre... More Details >>
- No：22376
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators
lower limit of operational voltage for DC

It is DC 24V. More Details >>
- No：24816
- Release Date：2019/04/09 15:17
- Category： Molded Case Circuit Breakers
3P MCCB in 1-phase 2-wire circuit

It is possible. Refer to the figure for connection as below. More Details >>
- No：24811
- Release Date：2019/04/09 15:18
- Category： Molded Case Circuit Breakers
About Low-voltage Power Distribution Products

A thermal load relay is intended for burnout protection of three-phasesquirrel cage motor. When direct current is applied to the thermal loadrelay, the opera... More Details >>
- No：23281
- Release Date：2018/09/12 15:11
- Category： Motor Starters
ACB　reverse connection

For ACB, Line and Load are not defined on the main circuit terminals. Reverse connection is available without any limitation. More Details >>
- No：22425
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Minimum operating voltage

Use with 24V, 0.5A or more for AC and DC in normal use. If the breakers are used less than 24V, use with 6V, 1A or more. Moreover, regular inspection of is ... More Details >>
- No：22401
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
AL/AX direct connection to PLC

It is necessary to use AL and AX switches that are suitable for the specification of PLC input unit. Generally AL and AX switch for micro-load are used for i... More Details >>
- No：22398
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Use in 40℃～60℃

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.) In the case that the ambient temperat... More Details >>
- No：22370
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers

71-80 of Total 322

Inquiries

page top