Delay-open type magnetic starter (MSO-T*DL and MSO-N*DL type) andmagnetic contactor (S-T*DL and S-N*DL type) have electr

It is not possible to change a contact of SD-Q type.

It is time from magnetizing or demagnetizing a control coil to operatingcontact (turning contact "ON" or "OFF").

It is the utilization category for opening/closing a motor load ofsemiconductor contactor specified in IEC60947-4-2. Uti

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below.

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrum

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system.

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

81-90 of Total 322

prev 9 / 33page next

About Low-voltage Power Distribution Products

It is IP20. More Details >>
- No：23327
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Delay-open type magnetic starter (MSO-T*DL and MSO-N*DL type) andmagnetic contactor (S-T*DL and S-N*DL type) have electrolyticcapacitors. Other types do not ... More Details >>
- No：23331
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is not possible to change a contact of SD-Q type. More Details >>
- No：23341
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is time from magnetizing or demagnetizing a control coil to operatingcontact (turning contact "ON" or "OFF"). More Details >>
- No：23343
- Release Date：2018/09/12 15:12
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is the utilization category for opening/closing a motor load ofsemiconductor contactor specified in IEC60947-4-2. Utilization categoryAC-53a applies for "... More Details >>
- No：23345
- Release Date：2018/09/12 15:12
- Category： Motor Starters
MCCB, ELCB and ACB at higher altitudes

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below. More Details >>
- No：24801
- Release Date：2019/04/09 15:17
- Category： Molded Case Circuit Breakers
Display digit of ACTIVE ENERGY

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrument User's Manual which you use. ・El... More Details >>
- No：24809
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators
Availability for direct measurement of 400V loads (ME96SS series).

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system. More Details >>
- No：22150
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators
Operation at the reversed phase connection (ME96SS series).

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
- No：22170
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:41
- Category： Electrical Indicators

81-90 of Total 322

Inquiries

page top