For Shunt Trip (SHT), it is the time from voltage application to open ACB main contact * AE3200-SW or less, AE4000-SWA:

If switching of neutral pole is not needed, it is possible to use 3-pole MCCB for 3-phase 4- wire circuit. Generally, it

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It i

The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distri

SSR stands for "Solid State Relay" and "SSC" stands for "Solid StateContactor". Basically, SSR means the semiconductor r

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole ty

PAＬ（Pre-Alarm Module

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for sec

It is a method which breaks short circuit current with both upstream and downstream circuit breakers. For example, in th

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

81-90 of Total 322

prev 9 / 33page next

ACB opening time

For Shunt Trip (SHT), it is the time from voltage application to open ACB main contact * AE3200-SW or less, AE4000-SWA: 0.04 sec or less* AE4000-SW to AE6300... More Details >>
- No：22418
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
MCCB 3P4W 3P use

If switching of neutral pole is not needed, it is possible to use 3-pole MCCB for 3-phase 4- wire circuit. Generally, it is recommended to use 4-pole circuit... More Details >>
- No：22385
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Checking the set values (ME96SS series).

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
- No：22165
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
About Low-voltage Power Distribution Products

The rated impulse withstand voltage of US-H* type is 6KV. This meets therequired impulse characteristic for power distribution equipment specifiedin IEC stan... More Details >>
- No：23329
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

SSR stands for "Solid State Relay" and "SSC" stands for "Solid StateContactor". Basically, SSR means the semiconductor relay of smallcapacity 1-pole configur... More Details >>
- No：23246
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Max. operational voltage for AC/DC Common

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole type is DC400V and 4-pole type is DC500... More Details >>
- No：22445
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
PAＬ（Pre-Alarm Module）

Pre-Alarm is a function which outputs an alarm if the load current exceeds setting current value. This is useful for securing continuous power supply and pre... More Details >>
- No：22376
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Cascade breaking

It is a method which breaks short circuit current with both upstream and downstream circuit breakers. For example, in the case that short circuit current at ... More Details >>
- No：22357
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Register address for active energy monitors in the MODBUS RTU communication (ME96SS series).

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
- No：22184
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:18
- Category： Electrical Indicators
Micro-load AL and AX switch

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with the standards (CE marking product an... More Details >>
- No：22413
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components

81-90 of Total 322

Inquiries

page top