This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition f

"b contact" is normally closed contact, and It is also called "NC (Normally Closed) contact".

It is necessary to supply an auxiliary power. As for an auxiliary power supply, you can use 50 Hz or 60 Hz from 100 V

It is a protection method which only trips the related circuit breaker and other fault-free circuit does not trip and co

The CC-Link is compatible with the new model.

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And t

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME9

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value wil

It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 uni

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

1-10 of Total 322

prev 1 / 33page next

Validation method for communication function (ME96SS series).

This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition for setting. More Details >>
- No：22180
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
B contact of AL/AX

"b contact" is normally closed contact, and It is also called "NC (Normally Closed) contact". More Details >>
- No：22435
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Power supply upon setting (ME96SS series).

It is necessary to supply an auxiliary power. As for an auxiliary power supply, you can use 50 Hz or 60 Hz from 100 VAC to 240 VAC and from 100 VDC to 240... More Details >>
- No：22161
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:14
- Category： Electrical Indicators
Selective coordination

It is a protection method which only trips the related circuit breaker and other fault-free circuit does not trip and continues power supply in the event of... More Details >>
- No：22366
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Compatibility between present model and new model for the CC-Link (ME96SS series).

The CC-Link is compatible with the new model. More Details >>
- No：22151
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:51
- Category： Electrical Indicators
Display upon upper/lower limit alarm (ME96SS series).

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And the “ALARM” indication and the “HI” in... More Details >>
- No：22169
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:36
- Category： Electrical Indicators
Micro-load AL and AX switch

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with the standards (CE marking product an... More Details >>
- No：22413
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Wire length for analog output and contact output（ME96SS series）

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 series is no-voltage "a" contact. The... More Details >>
- No：24807
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
Difference between measurement value of active power and calculated power value obtained from current, voltage and power factor (ME96SS series).

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
- No：22178
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:56
- Category： Electrical Indicators
Connectable number of MODBUS RTU (ME96SS series).

It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 units + 31 units + 2 units) More Details >>
- No：22190
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators

1-10 of Total 322

Inquiries

page top