It is impossible to turn off the LCD. It is possible to turn off back lights. When any button is not pressed for 5 minu

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement valu

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In c

It is possible to initialize set values depending on setting. The method of initializing the setting value differs dep

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Oper

Please check the register addresses. The register address for the present value of the power factor of each phase is

Please check the following items. (A) Is the power supplied between MA and MB？ (When the power is not supplied, the disp

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model.

With ME96SS ver.B, four measurement values can be checked digitally on one screen. For models before ME96SS ver.B, up to

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

1-10 of Total 57

prev 1 / 6page next

Turning off the LCD display and backlight (ME96SS series).

It is impossible to turn off the LCD. It is possible to turn off back lights. When any button is not pressed for 5 minutes, the automatic off mode setting... More Details >>
- No：22171
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:42
- Category： Electrical Indicators
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators , Energy Measuring Units
Acquired values through MODBUS RTU.

The acquired value by communication should be multiplied by the multiplying factor to change into the measurement value. Please refer to Section 7.3 of ... More Details >>
- No：22183
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:13
- Category： Electrical Indicators
LCD COM is flashing (ME96SS series).

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In case of MODBUS RTU Error content: ... More Details >>
- No：22186
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:20
- Category： Electrical Indicators
Initialization the set values (ME96SS series).

It is possible to initialize set values depending on setting. The method of initializing the setting value differs depending on the model. More Details >>
- No：22166
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:21
- Category： Electrical Indicators
The operating/storage temperature and humidity

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Operating humidity range: 0% to 85% an... More Details >>
- No：22153
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:56
- Category： Electrical Indicators
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Communication failure with the upper system through MODBUS RTU.

Please check the following items. (A) Is the power supplied between MA and MB？ (When the power is not supplied, the display does not work.) (B) Is the wir... More Details >>
- No：22182
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:08
- Category： Electrical Indicators
Error in the measurement value (ME96SS series).

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model. More Details >>
- No：22179
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
One screen display feature

With ME96SS ver.B, four measurement values can be checked digitally on one screen. For models before ME96SS ver.B, up to three measured values can be checked... More Details >>
- No：37806
- Release Date：2020/04/10 15:09
- Category： Electrical Indicators

1-10 of Total 57

Inquiries

page top