In a board installation state, the protection class is equivalent to IP50. This model is not waterproof.

It is not available. All configuration shall be conducted by the customer.

This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each v

This model has “Motor Starting Current Mask Function”. This function stops the alarm output and updating of the maximum

Please check the register addresses. The register address for the present value of the power factor of each phase is

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrume

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The prog

It is no problem. The memorized data such as active energy, reactive energy, and apparent energy is not deleted. The me

It is no influence on operating and characteristics even in the following cases. 1. Overcurrent 20 times of rated curr

This model does NOT comply with the IEC61850.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

21-30 of Total 57

prev 3 / 6page next

IP protection class (ME96SS series).

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof. More Details >>
- No：22158
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:13
- Category： Electrical Indicators
Setting upon delivery (ME96SS series).

It is not available. All configuration shall be conducted by the customer. More Details >>
- No：22149
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:49
- Category： Electrical Indicators
Availability for special primary current and special primary voltage (ME96SS series).

This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each value within the selectable range as ... More Details >>
- No：22148
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:15
- Category： Electrical Indicators
Disable an alarm for motor starting current (ME96SS series).

This model has “Motor Starting Current Mask Function”. This function stops the alarm output and updating of the maximum values during the setting time when a... More Details >>
- No：22175
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:51
- Category： Electrical Indicators
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Display digit of ACTIVE ENERGY

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrument User's Manual which you use. ・El... More Details >>
- No：24809
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators
Sample program for MODBUS RTU communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The programming manual can be downloaded fr... More Details >>
- No：24805
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
Availability for changing set values while operating (ME96SS series).

It is no problem. The memorized data such as active energy, reactive energy, and apparent energy is not deleted. The measurement is continued during setti... More Details >>
- No：22164
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:19
- Category： Electrical Indicators
Tolerance for overload (ME96SS series).

It is no influence on operating and characteristics even in the following cases. 1. Overcurrent 20 times of rated current is applied for 0.5 second. 2. Ov... More Details >>
- No：22159
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Support status for IEC61850 (ME96SS series).

This model does NOT comply with the IEC61850. More Details >>
- No：22147
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:11
- Category： Electrical Indicators

21-30 of Total 57

Inquiries

page top